Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator fan in freezer.
6 of 7 peoplefound this instruction helpful.
Alfred from NEWPORT, NC
Easy
30 - 60 mins
Screw drivers
I took the old fan out and replaced it with the new one,right easy task.
Was this helpful?
Thank you for voting!
Raise side of fridge and slide 2x4 under side with broken wheel.
5 of 6 peoplefound this instruction helpful.
Hans from OGDEN, UT
Really Easy
Less than 15 mins
Socket set
Remove back side cardboard access cover. About 6 dcrews need to be removed. Remove 9/16” bolt and lower compressor tray frame down to slide out wheel axel. Place wheel in slot and replace axel. Lift compressor tray and replace 9/16” bolt. Replace cardboard cover. Remove 2x4.
Was this helpful?
Thank you for voting!
I added an ice maker to a 20 year old refridgerator
4 of 5 peoplefound this instruction helpful.
Nicholas from WEST CHESTER, OH
Easy
30 - 60 mins
Pliers, Socket set
I added an icemaker kit. Everything I needed was in the kit. The refrigerator was presetup for an icemaker it was just never added. The only problem I had was that the holes for attaching the water solenoid were not pre drilled so I had to drill them myself and use sheet metal screws. The icemaker is working great.
Was this helpful?
Thank you for voting!
Fan motor died
3 of 3 peoplefound this instruction helpful.
Michael from TROY, IL
Very Easy
15 - 30 mins
Screw drivers, Socket set
First, made sure new fan worked then Placed back in bracket with bushings-only goes in one way, pushed fan back on. screwed bracket to back of freezer and ran the wires to their original place, plugged in the two plugs, put the back piece up attaching ground and pulling ice maker plug thru, screwed back on. Plugged in ice maker, mounted i
... Read morece maker on freezer wall. Plugged it in. Exact reversal of how it was removed. Not a lot parts to get confused.
Read less
Was this helpful?
Thank you for voting!
Getting Ice Maker to sit in place prior to tightening screws.
3 of 3 peoplefound this instruction helpful.
George from POWELL, OH
Easy
15 - 30 mins
Nutdriver
Don not completely remove holding icemaker screws. Unit slips over screws and drops down into place and the use nutdriver to tighten in place. Rest of unit was sound and wasn’t replaced. After icemaker is installed wait for a while and unit self activated and creates ice cubes.
Was this helpful?
Thank you for voting!
Installed a Ice Maker
3 of 3 peoplefound this instruction helpful.
Don from HOUMA, LA
Very Easy
15 - 30 mins
Nutdriver, Screw drivers
Very easy to install
Was this helpful?
Thank you for voting!
It was my first time to install a ice maker.
3 of 3 peoplefound this instruction helpful.
Gary from MACOMB, OK
Easy
1- 2 hours
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Was this helpful?
Thank you for voting!
Not getting cold
3 of 4 peoplefound this instruction helpful.
John from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
Followed instructions on your website
Was this helpful?
Thank you for voting!
OLDER Ice Maker on the fritz
6 of 14 peoplefound this instruction helpful.
Eric S from Boca Raton, FL
Really Easy
15 - 30 mins
Nutdriver, Wrench set
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Was this helpful?
Thank you for voting!
My fridge was very warm Temperature was 56 and my son did the work on it for me
2 of 2 peoplefound this instruction helpful.
Rosemary from ALBION, NY
Really Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
My son said it was easy to put in the motor I didn’t need the fan my fan was in good shape yet thank you so much for everything
Was this helpful?
Thank you for voting!
Broken Refrigerator door retainer
2 of 2 peoplefound this instruction helpful.
Leroy from IRVINGTON, AL
Very Easy
Less than 15 mins
This job was extremely easy, snap on.
Was this helpful?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
My husband is an appliance man and he did the work.
Was this helpful?
Thank you for voting!
ordered a new ice maker, new refrigerator did not come with one.
2 of 2 peoplefound this instruction helpful.
Scott from ROCHESTER, NY
Easy
30 - 60 mins
Nutdriver, Screw drivers, Wrench (Adjustable)
I watched the video that was included with my on line order, it was helpful, although different model shown . I would say it was not difficult to install, the enclosed instructions were a bit confusing.
Was this helpful?
Thank you for voting!
Refrigerator suddenly not staying cold. Freezer icing up about 1 month before.
2 of 2 peoplefound this instruction helpful.
PAUL from SANTA MARIA, CA
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers
Noticed the evaporator fan not spinning but would spin with a finger jump start. After looking up the part on the PartSelect liner parts diagram I found the installation video that really helped. After installing the fan it tested out fantastic. The fan was blowing air 10 times more than the old one. Refrigerator works great on the origin
... Read moreal econo setting.
My Orders
