WRT318FZDW07 Whirlpool Refrigerator - Parts

Door switch turns the light off when you close the door.

This is a meat drawer shelf frame for some models of refrigerator. This white plastic frame measures approximately 15 inches wide by 11.5 inches deep by 1.5 inches tall, and is used to allow the meat drawer to easily slide in and out of the fridge. If your meat drawer is currently sagging and this frame is damaged and not supporting it en...Read moreough, it needs to be replaced. Replacing this frame requires you to remove the meat drawer and the glass shelf above it, so you can flip it over and slide out the old frame, and slide in the new. This frame is supplied by the original equipment manufacturer and is sold individually, so it does not include any other parts for the meat drawer or shelf above it.

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installe...Read mored, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering. Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.

This temperature sensor is for refrigerators. The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands. The ...Read morethermistor itself, part WPW10383615, should test at these Ohms depending on temperature. It's recommended to test at room temperature and again in a glass of ice water to make sure it's sensing temperatures properly. So it should read around 3000 - 5000 Ohms at room temperature 7000 - 10000 Ohms at 0°C and 20000 Ohms at -15°C.

This screw is sold individually.

The water inlet valve provides water to the ice maker and dispenser. If a water line is required, see the related item. Ensure the refrigerator is unplugged and the water supply is off before installation.

The refrigerator door gasket (white) is a flexible seal that ensures an airtight closure between the refrigerator door and the main compartment. It helps maintain optimal cooling efficiency by preventing warm air from entering and reducing energy consumption. Over time, door gaskets can wear out, leading to air leaks that can affect perfo...Read morermance. Replacing a worn gasket can improve temperature consistency and prevent excess condensation inside the fridge. Before installation, ensure the door surface is clean for a secure fit. Check compatibility with your refrigerator model before ordering, as gaskets may have slight variations in size or design.

Food that freezes in the refrigerator may point to a temperature sensor problem. The sensor works like a small thermometer by tracking the temperature inside the compartment. As the temperature changes, it sends a signal that helps the appliance control its cooling cycles. Replacement may be needed if testing shows that the sensor gives t...Read morehe wrong reading or has damaged wires. Disconnect electrical power before opening the appliance. Follow the service guide to find the correct sensor location, and make sure the plug is fully connected during installation.

Sold Individually.

Introducing the Whirlpool Refrigerator Defrost Bi-Metal Thermostat. A genuine OEM part, this thermostat is built for compatibility with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerator models. The primary function of this defrost bi-metal thermostat is to protect the evaporator from overheating d...Read moreuring the defrost cycle. Before installation, it's advised to unplug the refrigerator and properly store any perishables that could spoil while the power is off. Safety is paramount, so remember to wear work gloves to safeguard your hands during installation. Confirm that this thermostat is ideal for your model before purchase, as parts can appear identical but may have minute differences in size and shape.