- Home
- WRT318FZDM07
- Instructions
WRT318FZDM07 Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
change evap.fan motor
-
William L. from Delanson, NY
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
unplugged the fridge removed the shelf, remove the rear wall to access the motor removed the 2 screws holding the motor and unplugged motor from harness, then unplugged the groung wire .then put it back together up and running in 15 mins.
Was this helpful?
Thank you for voting!
Freezer running, yet fridge warm.
-
Skyler from San Marcos, TX
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
The fridge went warm and I noticed ice build-up on the freezer floor underneath the coils. I mistakenly thought that the defrost heater (or thermostat or timer) must have been the culprit. I used a voltmeter to test those components and chased a wild goose for quite sometime before realizing that the evaporator fan was not spinning and
... Read more
that it failed a test with the voltmeter. Replacing the fan easily fixed my problem! I later realized that the sheet of ice on the freezer floor indicated that the defrost cycle had been working. Were that not the case, the ice would have been all over the coils.
Read less
Was this helpful?
Thank you for voting!
The freezer was working but the refridg was'nt cool enough.
-
Diana from Crocker, MO
- Really Easy
- Less than 15 mins
Took the old fan motor out and installed the new one. Wow it's getting cool now. Thank You Parts select for the information on your site. Fast shipping. Very pleased I found your site, which stated it was the fan motor 45% of the time. It saved me from having to have a repairman come to my home. I called one but he did'nt work in this are
... Read more
a. They gave me another man's number, and I called and left a message on the recorder, but he never got back to me. So I was happy to have found your site. Thank You again!
Read less
Was this helpful?
Thank you for voting!
No Light
-
Mary from Jefferson Township, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took socket out and replace it with new one. Very easy. W saved alot of money doing it ourself.
Was this helpful?
Thank you for voting!