EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WRT19PRAD0 Frigidaire Refrigerator - Instructions

All Instructions for the WRT19PRAD0
121 - 135 of 254

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer okay, but fridge was warm
0 of 1 people found this instruction helpful.
  • brad from minneapolis, MN
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Website was great!

The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.

To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Was this helpful?
Thank you for voting!
leaking water down into fridge
0 of 2 people found this instruction helpful.
  • Ronald from Defiance, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
just like the video showed...it was excellent!!!
Was this helpful?
Thank you for voting!
coil Iceing up
0 of 2 people found this instruction helpful.
  • Thomas from Stuart, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check the heaters and drain .
Was this helpful?
Thank you for voting!
We Are Moving Out Of Military Housing And We Had To Replace The Freezer Door Holder Before We Moved Or We Would Have Had To Pay For The Wholr Refrigerator
0 of 2 people found this instruction helpful.
  • Christopher from Fort Sill, OK
  • Really Easy
  • Less than 15 mins
We replace the end pieces to hook the holder back on the door.
Was this helpful?
Thank you for voting!
could not use the meat drawer as it kept falling off
0 of 2 people found this instruction helpful.
  • Jeffrey from Baltimore, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the screws that were in the original part that had a broken plastic endpiece on it. Put the new hanging rail on with the screwdriver and good as new!. I also replace some clips that were worn out and kept coming off when I put too much in the freezer doors. They were snap on so it took less than a minute to replace all 4 that I ordered. Now my refriderator and freezer work like it new and doesn't keep falling apart.
Was this helpful?
Thank you for voting!
Getting the light socket to snap back in properly
1 of 5 people found this instruction helpful.
  • Robert from HELENA, AL
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
It snapped in place.
Was this helpful?
Thank you for voting!
broken shelf bar with missing end brackets.
0 of 2 people found this instruction helpful.
  • Robert from Oconomowoc, WI
  • Really Easy
  • Less than 15 mins
Ordered the parts from the product discription (photo) as well as chart showing actual size. Got the parts( in two separate shipments) cut the bar to length and snapped them inot place. Bingo!
Was this helpful?
Thank you for voting!
the compressor capacitor overheated
  • Bart from goldsboro, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Was this helpful?
Thank you for voting!
fridge shut down stopped running
  • robert from Holbrook, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
simply watched videos provided…making it EXTREMELY simple..saved me hundreds by not having to throw it out!! running better than ever like as if it was brand new!!
Was this helpful?
Thank you for voting!
Freezer Worked Fine, Refrigerator Was 47 Degrees
  • Allan E from Manhattan, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I went on partselect put in make and model number, a list showed the probable cause. I watched the how to video. When I received the part in short order I loosened 2 screws disconnected the wiring plug (sprayed it with contact cleaner) pluged it in, removed screws from old part put them in new one. Put timer back in its location and ti ghtened the screws. Very eazy, works fine.
Was this helpful?
Thank you for voting!
Overheat coils at the bottom inside of the freezer
  • Costas from new hyde park, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I pick up very fast at these kind of small jobs but because of my very busy schedule I decided to call (2 times) technicians about my problem but none of them had any idea. About my repair, I removed the grill at the bottom of the refrigerator, unscrew a small plate (located on the bottom left side) that's holding the defrost timer. I plu g on the new part, screw back the plate with the defrost timer and that was it. Don't forget to turn clockwise with your finger the timer until you hear a "click" and then turn it slightly more to the right. There is also a video on U-tube.
Was this helpful?
Thank you for voting!
fridge side was getting warm.
  • Darryl from Russellville, KY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
open freezer door two screws just below unscrew slide piece to side unplug reinstall very simple.
Was this helpful?
Thank you for voting!
refer quit cooling and so did freezer
  • jerry from petaluma, CA
  • Really Easy
  • Less than 15 mins
I replaced the defrost timer,defrost thermostat,and run cap.as it turned out the compressor went bad. I dont know the model because but the time I got this review I replaced the refer with a knew one . two weeks living out of coolers was so much fun !!!!!!!!
Was this helpful?
Thank you for voting!
Faulty defrost timer. Freezer would not maintain temperature
  • Steve from Nineveh, IN
  • Easy
  • Less than 15 mins
  • Nutdriver
Watched the video once. Removed four 1/4 inch screws with a nut driver unplugged the unit, took out two screws securing the timer. Replaced did all of this in about 10 minutes. It was "exactly" as the video showed and it's worked perfectly since the replacement of the faulty timer. I saved a $75.00 service call minimum and the part was mo re than likely cheaper from Part Select than from the repair facility. Although I'm a pretty good handy man, you would not need any experience to make this repair. The instructions are precise and the part fit perfectly.
Was this helpful?
Thank you for voting!
Refrigerator too Warm
  • Raymond from Yorktown Heights, NY
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
tested the thermostat, cleaned the coils, checked seals all clean. defrost timer did not cycle so replaced it but issue not resolved. even though freezer was working while refrigerator was problematic, proceeded to open freezer panel. discovered that fan was not pushing cold air into refrigerator compartment due to ice build up in conne cting tubes. cleaned ice and replaced panels to positive result
Was this helpful?
Thank you for voting!
All Instructions for the WRT19PRAD0
121 - 135 of 254