EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WRT17CGCD0 Frigidaire Refrigerator - Instructions

All Instructions for the WRT17CGCD0
76 - 90 of 199

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Coils kept icing and refrigerator stopped cooling lower compartment.
5 of 14 people found this instruction helpful.
  • Raymond from Sierra Madre, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Replaced defrost timer & thermostat.
Was this helpful?
Thank you for voting!
No freezing or cold in either freezer or refridgerator - compressor did not run.
1 of 2 people found this instruction helpful.
  • George from Sunnyvale, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.
Was this helpful?
Thank you for voting!
Defroster didn't work
1 of 2 people found this instruction helpful.
  • George from Eatonville, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people found this instruction helpful.
  • Denise from Landover, MD
  • Really Easy
  • Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
frezzer iceing over and not cooling the refrigerator
1 of 4 people found this instruction helpful.
  • Marcus from Pine Hill, AL
  • Really Easy
  • Less than 15 mins
Just removed the two screws and unpluged it.
Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator.
Thanks for the fast delevery. Will do busness with you in the future.
Was this helpful?
Thank you for voting!
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 people found this instruction helpful.
  • LUIS from CENTENNIAL, CO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this helpful?
Thank you for voting!
freezer worked frig was warm. Ice maker is still not working
0 of 1 people found this instruction helpful.
  • steve from Kirkland, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
Was this helpful?
Thank you for voting!
loud noise fan blade broke,off balance
0 of 1 people found this instruction helpful.
  • EDWIN from ELWOOD, IN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!
Freezer okay, but fridge was warm
0 of 1 people found this instruction helpful.
  • brad from minneapolis, MN
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Website was great!

The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.

To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Was this helpful?
Thank you for voting!
coil Iceing up
0 of 2 people found this instruction helpful.
  • Thomas from Stuart, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check the heaters and drain .
Was this helpful?
Thank you for voting!
leaking water down into fridge
0 of 2 people found this instruction helpful.
  • Ronald from Defiance, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
just like the video showed...it was excellent!!!
Was this helpful?
Thank you for voting!
Getting the light socket to snap back in properly
1 of 5 people found this instruction helpful.
  • Robert from HELENA, AL
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
It snapped in place.
Was this helpful?
Thank you for voting!
fridge shut down stopped running
  • robert from Holbrook, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
simply watched videos provided…making it EXTREMELY simple..saved me hundreds by not having to throw it out!! running better than ever like as if it was brand new!!
Was this helpful?
Thank you for voting!
freezer would not freeze longer than one day. after ten years without problem
  • ronald from deering, NH
  • Really Easy
  • Less than 15 mins
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Was this helpful?
Thank you for voting!
refregirator too warm
  • HUNG from KENT, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I order defrost timer then replaced it but it seemed doesn't work. I order defrost thermostat again then it worked fine until now. Thanks. Part selects.
Was this helpful?
Thank you for voting!
All Instructions for the WRT17CGCD0
76 - 90 of 199