WRT16CGCD3 Frigidaire Refrigerator - Parts

This refrigerator shelf support grommet helps secure and stabilize interior shelves by anchoring them firmly to the refrigerator liner wall. Made from durable white plastic, it helps keep wire or glass shelves properly aligned and prevents shifting, sagging, or instability during regular use. This part may need replacement if shelves become loose, uneven, or unable to properly support stored items.

This cold control thermostat cycles on and off regularly to maintain a cold temperature in your refrigerator.

This kit includes the drain pan, thermal mastic, sound dampening pad and 2 retainer wires. This part mounts to the top of the compressor.

This is used to hold eggs in your refrigerator.

This strap is designed for use with the evaporator in your refrigerator. The function of this part is to hold wires, tubes, defrost heaters and other parts in place. If you notice that any of these parts are not held in place properly, you will most likely need to replace the refrigerator strap. This part is made entirely of thin metal. T...Read morehe part is very bendable, and the smaller end is designed to fit inside the large one. This part is sold individually. It is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.

Sold Individually.

This refrigerator compressor is a key component in the cooling system, responsible for compressing and circulating refrigerant gas throughout the appliance. It increases the pressure and temperature of the gas before sending it through the condenser coils, where heat is released and the gas condenses into a liquid. The refrigerant then tr...Read moreavels to the evaporator, where it expands and evaporates, creating a cooling effect that is distributed throughout the refrigerator. A malfunctioning compressor can lead to poor cooling performance or complete system failure. Proper lubrication and cooling are essential for maintaining its efficiency and extending the life of your appliance.

This push-on nut can be used for a variety of household appliances. To find the exact location and proper application of this part, refer to your appliance manual. Push-on nuts, also known as push-on retainers or push-on fasteners, allow components to be easily and securely assembled to a smooth shaft. A push-on nut has radial teeth that ...Read moreare formed at an angle perpendicular to the target shaft. The angled teeth allow the nut to slide onto the shaft in one direction while resisting motion in the reverse direction. Remember, to ensure the nut properly holds the shaft securely in place, it is important that the shaft material is softer than the nut.