Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
freezer worked frig was warm. Ice maker is still not working
0 of 1 peoplefound this instruction helpful.
steve from Kirkland, WA
Really Easy
15 - 30 mins
Screw drivers
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
Was this helpful?
Thank you for voting!
loud noise fan blade broke,off balance
0 of 1 peoplefound this instruction helpful.
EDWIN from ELWOOD, IN
Really Easy
15 - 30 mins
Nutdriver
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!
Our freezer warmed up and we had to throw out all the food.
0 of 1 peoplefound this instruction helpful.
Judith from Black Diamond, WA
Easy
15 - 30 mins
Screw drivers
We were looking for a new freezer --thinking it wouldn't be worth calling a repairman. I was trying to determine the size of the freezer and couldn't find it in the manual. So I googled the model number and stumbled upon this site. Thought it would be worth a try and $12 plus shipping to replace the thermostat. Got the thermostat a co
... Read moreuple days later, followed the video directions to replace it--not hard! Plugged it in and it is working great!!! SOOOOO glad I stumbled on your site! You saved us $700-$800!! Thank you! Thank you! Thank you!
Read less
Was this helpful?
Thank you for voting!
cracked inner door panel
0 of 1 peoplefound this instruction helpful.
William from Miami, FL
A Bit Difficult
30 - 60 mins
Screw drivers
removed the screws and the gasket and replaced. it.. Most difficult part was the gunk at the bottom of the gasket which I had to clean and also made the screws rusty. i had to clean that with a rust removal gel.
It went ok nevertheless.
Was this helpful?
Thank you for voting!
sheft ends brolen
0 of 1 peoplefound this instruction helpful.
Helen from Gulf Breeze, FL
Really Easy
Less than 15 mins
Cleaned and removed old ends, applied new ends and installed. Ends fit to order, shipping quick and parts affordable. Thank you
Was this helpful?
Thank you for voting!
door end cap broken,
0 of 1 peoplefound this instruction helpful.
Edward from Piscataway, NJ
Really Easy
Less than 15 mins
Put the new ordered door end caps in place, everything worked fine.
Was this helpful?
Thank you for voting!
clips on both end caps we broken and the crossbar kept falling off.
0 of 1 peoplefound this instruction helpful.
Frank from Orange Park, FL
Really Easy
Less than 15 mins
First i pulled the crossbar off the door, then I pulled both end caps off the crossbar and then I put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
Was this helpful?
Thank you for voting!
End caps broken
0 of 1 peoplefound this instruction helpful.
Russell from Clevelamd, TN
Really Easy
Less than 15 mins
End caps snapped out of door, Replaced with new caps
Was this helpful?
Thank you for voting!
Freezer door shelf end cap broke
0 of 1 peoplefound this instruction helpful.
Melanie from Green Bay, WY
Really Easy
Less than 15 mins
The only problem I had was that the end cap was sent before the rack. This refrigerator is in our cottage and I brought up the end cap while waiting to receive the rack. I couldn't remember where I put the end cap, so when the rack came it took me a few weekends to find the end cap. Once I did, it took me less than 1 minute to repair.
... Read moreI put the rack on the end caps & pushed the end cap in place. DONE!
frezzer iceing over and not cooling the refrigerator
1 of 4 peoplefound this instruction helpful.
Marcus from Pine Hill, AL
Really Easy
Less than 15 mins
Just removed the two screws and unpluged it. Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator. Thanks for the fast delevery. Will do busness with you in the future.
Was this helpful?
Thank you for voting!
Wrong size listed on website.
0 of 1 peoplefound this instruction helpful.
Elizabeth from Weems, VA
Really Easy
Less than 15 mins
The end cap is easy to remove and replace. The personnel at PartSelect was extremely helpful in re-ordering the correct part.
Was this helpful?
Thank you for voting!
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 peoplefound this instruction helpful.
LUIS from CENTENNIAL, CO
Really Easy
Less than 15 mins
Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this helpful?
Thank you for voting!
no problem
2 of 7 peoplefound this instruction helpful.
bradley from shelbyville, IL
Really Easy
Less than 15 mins
put shelf inside refrigertaor
Was this helpful?
Thank you for voting!
The door end caps were broken and not fixable
0 of 1 peoplefound this instruction helpful.
Ryan from Coralville, IA
Really Easy
Less than 15 mins
I simply placed the retention bar between the new end caps and popped it into place. Took about 10 seconds to complete.
Was this helpful?
Thank you for voting!
refrigerator and freezer not cooling
1 of 5 peoplefound this instruction helpful.
Jimmie from Simms, TX
Really Easy
Less than 15 mins
Nutdriver
removed screws with from the back panel of the freezer; located defrost thermostat attached to coil with a metal clip; unplugged thermostat and replaced with the new one. Put every thing back together and it works perfectly.
My Orders
