My Orders
- Home
- WRT108FFDB00
- Instructions
WRT108FFDB00 Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
GASKET AROUND DOOR WAS LETTING AIR IN/ COLD AIR OUT
1 person
found this instruction helpful.
-
Susan from BONNEAU, SC
- Very Easy
- Less than 15 mins
Put gaskets in the car dash to get warm (90 outside), Pulled off old gasket and brought new one in and just inserted it into the slot around door. Was a little buckled but it straightened out after a few hours. Was very easy!
Was this helpful?
Thank you for voting!
Cheap plastic part prone to break if crisper drawer jams even slightly.
1 person
found this instruction helpful.
-
Edward from SILVER SPRING, MD
- Really Easy
- 30 - 60 mins
-
Nutdriver
After left side track broke 3 times and then center track also broke, I got tired of buying replacements (even though they are easy to install and not very expensive). So I bought a tube of plastic epoxy and a bit of fiberglass cloth and reinforced the plastic that the (#8 x 1/2 inch) screws go through (where it breaks) on ALL 3 tracks,
... Read more
then redrilled holes, added a washer, and used #8 x 5/8 inch screws). Maybe these wiil last.
Read less
Was this helpful?
Thank you for voting!
Did not have ice maker
3 of 8 people
found this instruction helpful.
-
Marisa from TEMPE, AZ
- Very Easy
- 1- 2 hours
-
Nutdriver
Followed online video instructions
Was this helpful?
Thank you for voting!
I broke the cooling fan while cleaning the heat exchange area
1 of 3 people
found this instruction helpful.
-
Daniel from N TONAWANDA, NY
- Really Easy
- 15 - 30 mins
Very simple, pulled old fan blade off and pushed new fan blade onto shaft. Perfect fit!
Was this helpful?
Thank you for voting!