Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
no problem. the ice and water need to be replaced every 6 months
18 of 32 peoplefound this instruction helpful.
Patricia from ALAMEDA, CA
Really Easy
15 - 30 mins
Took off the cover, pulled out the old filter, inserted the new one and closed the door.
Was this helpful?
Thank you for voting!
We purchased the refrigerator new - but we wanted an extra door shelf bin for more dooor storage.
10 of 12 peoplefound this instruction helpful.
Carolynn from CASTLE ROCK, CO
Really Easy
Less than 15 mins
We ordered the bin and it arrived on time. HOWEVER - the plastic bin was broken in two areas. There was NO protective padding on the bin - just a simple plastic bag and then shoved into a box. We called customer service and the agent sent out a new one and we requested that this one be given better protective padding. She also refun
... Read moreded the first one as well as shipping costs. HOWEVER, when the 2nd bin arrived there was no padding but at least it was not broken!
Perhaps the shipping department needs to learn about Bubble Wrap - there really is no excuse for these plastic bins not to be protected..
Read less
Was this helpful?
Thank you for voting!
Leaking water tube connector/union
10 of 12 peoplefound this instruction helpful.
Roderick from NEWTOWN, PA
Easy
15 - 30 mins
Pliers, Screw drivers
Received the union I ordered, then discovered that the tubes were different sizes, so I had the wrong part. I had read elsewhere that it was necessary to trim the two ends of the tubes with a box cutter to stop the leaks - I did this, and the leaking stopped. I was then able to go to a local hardware store and get a 5/16 to 1/4 union and
... Read morereplace it. The leaking is stopped, and the water supply in the door is now working like new. No problem with partselect, but I did buy a caliper so that I can check tube diameters if I ever have a similar problem! This is a great site to find instructions - well worth the time to search!
Read less
Was this helpful?
Thank you for voting!
auger blades broken
11 of 15 peoplefound this instruction helpful.
Michael from Ponchatoula, LA
A Bit Difficult
30 - 60 mins
Nutdriver, Pliers, Screw drivers
Removed ice bin then pulled front cover with nut driver . Pull small rod from side ( one screw holding rod and spring). Pull auger out. Take plastic nut off end ( CLOCKWISE) LEFT HAND THREAD. Keep all ice crusher blades in order when you pull them off. Install new auger and reverse steps. web site has exploded view. It looks difficult but
... Read more it isn't.
Read less
Was this helpful?
Thank you for voting!
The refrigerator display said I need to replace the filter.
12 of 19 peoplefound this instruction helpful.
ronald from SEVERNA PARK, MD
Really Easy
Less than 15 mins
When the filter arrived, I removed it from the package. Upon reading the instructions, I removed the old filter. When I removed the old filter I NOTICED HOW IT CAME OUT SO THAT I COULD HOLD THE NEW FILTER IN THE SAME POSITION AND REPLACED IT WITH THE NEW IN THE SAME POSITION. When I closed the cover door, I w
... Read moreent to the display panel and reset water filter display.
Read less
Was this helpful?
Thank you for voting!
Light switch rocker broke, disabling freezer internal light, water dispenser, and ice dispenser
10 of 14 peoplefound this instruction helpful.
Kenneth from Newton Grove, NC
Really Easy
Less than 15 mins
Very simple. Matched female plugs with respective male color coded prong; pushed together then inserted unit in slot of freezer sidewall and rotated into position...job done.
Was this helpful?
Thank you for voting!
broken light switch
12 of 20 peoplefound this instruction helpful.
Richard from West Warwick, RI
Really Easy
Less than 15 mins
Screw drivers
followed the instructions provided and that's it!
Was this helpful?
Thank you for voting!
Broken rear cabinet rollers
8 of 9 peoplefound this instruction helpful.
Jeff from East Schodack, NY
Easy
15 - 30 mins
Nutdriver, Socket set
Removed the rear cardboard cover and cleaned the area around the compressor and as much of the condensor and fan area as possible. Removed the two base section securing bolts. Jacked the rear of the cabinet up enough to seperate the base from the cabinet. Removed the roller pins and removed and replaced both rollers. Lowered the cabinet
... Read more back into place, replaced the base bolts and the cardboard cover. The rollers that were sent were of much better quality than the original plastic type and should last the life of the refrigerator. Be careful when moving the fridge as the original rollers may cut into or scratch the flooring.
Read less
Was this helpful?
Thank you for voting!
35 year old water tube became brittle and cracked; leaking water
8 of 10 peoplefound this instruction helpful.
Melvin from OPELIKA, AL
Very Easy
Less than 15 mins
Screw drivers
Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.
Was this helpful?
Thank you for voting!
Water ?? filter needed to be replaced
9 of 13 peoplefound this instruction helpful.
Victor T from CORDOVA, TN
Very Easy
Less than 15 mins
Simple, turn and pull to remove. Push and turn to install.
Was this helpful?
Thank you for voting!
light in refrigerator went OFF when in installed the new water filter
7 of 7 peoplefound this instruction helpful.
LUC from PALM DESERT, CA
Very Easy
Less than 15 mins
STRANGE ! to moment I installed the filter ALL the internal lights in my refrigerator went OFF and never came back.
Strange !! refrigerator works fine but no more light in it !!
Cracked the old drawer by closing the fridge door while drawer was open
8 of 10 peoplefound this instruction helpful.
Jason from TUCSON, AZ
Very Easy
Less than 15 mins
Easy peasy. Take old drawer out, slide new drawer in. Done!
Was this helpful?
Thank you for voting!
Reset rater filter
7 of 8 peoplefound this instruction helpful.
Andre from GRAND RAPIDS, MI
Very Easy
Less than 15 mins
Hold both water filter reset touch sensors down together. This will reset the water sensor indicator.
Was this helpful?
Thank you for voting!
Replacing the water filter.
10 of 17 peoplefound this instruction helpful.
Sandra from Altoona, AL
Really Easy
Less than 15 mins
Lift up on the water filter door to open. Pull out the old filter while noticing the arrow pointing up on the filter. Pull off the green caps on the new filter and pop the new filter in with the arrow pointing up as on the old filter. Push in until the filter snaps into place. Close the filter door. Push reset on the water filter button
... Read more on the freezer door to reset. Very easy!
Read less
Was this helpful?
Thank you for voting!
Icemaker Wouldn't Work
7 of 9 peoplefound this instruction helpful.
NANCY from KEOKUK, IA
Really Easy
15 - 30 mins
Screw drivers, Socket set
I removed the screws that attached the drum housing to the bin. I detached the auger & removed the broken drum assembly, turning the auger to the right, opposite what I thought it should be. I slipped the end of the auger into the new bin coupler & put it in place at the rear of the bin. Next I slipped the auger drum into place & ti
... Read moreghtened it to the left with a socket wrench. I screwed the drum housing to the bin, put the bin back into the freezer & I now have ice through the door again. Easy repair even for me, a 60+ woman.
My Orders
