WMMF5930PV00 Whirlpool Microwave - Parts

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes bef...Read moreore starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

This damper is an authentic OEM replacement assembly used in microwave/range hood combos. It includes the damper door and frame. It is designed to direct the flow of air through the vent duct, and the release of steam and heat from the appliance during cooking. Over time, the damper door and frame can wear down or become obstructed by foo...Read mored particles and debris. A faulty damper assembly will result in poor ventilation, uneven cooking, and excessive moisture buildup which can damage internal components in the appliance. Disconnect any wires or connectors attached to the faulty damper assembly and remove it from the appliance. Position the new damper assembly and reconnect the wires/connectors before securing it with the appropriate fasteners.

This authentic high-voltage capacitor stores and supplies electrical energy to the magnetron so that your microwave can heat up your food. It is a cylindrical component located inside the control area of the microwave. If the capacitor malfunctions, you may hear buzzing or humming noises, witness sparks or arcing inside the microwave, or ...Read moreexperience inconsistent or no heating of your food. As microwaves use high voltage, exercise extreme caution during the repair process to avoid injury. Even when unplugged, the capacitor retains a significant electrical charge. To replace it, start by unplugging the microwave and removing the glass turntable and support before proceeding. Refer to the user guide for instructions on accessing the capacitor within the cabinet. Discharge the capacitor by creating a short circuit between each terminal and between each terminal and the chassis. Do so by using a pair of insulated-handle needle-nose pliers to simultaneously touch both terminals. Alternatively, you can use a well-insulated screwdriver, touching one terminal and gently sliding it forward to the other terminal, holding it there for a few seconds. Avoid touching the metal part of the tool and be aware that this can result in a loud and startling popping sound. Once discharged, you can safely disconnect the wires and remove the mounting fasteners. Please note that this OEM replacement part is sold individually.

Introducing the Whirlpool NAMEPLATE, a genuine OEM part tailored to work with various Whirlpool models. Specifically designed for ranges, this nameplate prominently displays the prestigious Whirlpool brand name, reaffirming the quality and reliability of your appliance. Please ensure your model's compatibility with the NAMEPLATE before pu...Read morerchasing. As some parts may appear identical, be aware that there can be minor variations in size and shape. Enjoy enhancing your appliance with this finely-crafted part. Trust Whirlpool for all your appliances needs.