WMH31017HZ08 Whirlpool Microwave - Parts

This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb,...Read more you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.

This mounting plate is sourced directly from the original manufacturer for use with microwaves. It is a metal plate designed to support a microwave by attaching the microwave to the wall studs. If the mounting plate wears down or becomes damaged, it will cause the microwave to tilt and become unstable, potentially damaging the appliance a...Read morend the wall it is attached to. Therefore, it is important to replace the plate promptly. First disconnect the microwave from the power source and locate the fasteners that hold the mounting plate. Detach the old plate and align the new one with the existing mounting holes. Secure the plate and check that the microwave is stable and unmoving.

This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microwave produces no heat, heats inconsistently, or gets noisy, replacing this part can be the solution. The tools needed for this replacement are a nutdriver, plier...Read mores, and screwdrivers. First remove the microwave cover, then remove the old part by disconnecting the small thermostat. Replace with the new diode. Remember to use the diagram provided by the manufacturer for more instructions.

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes bef...Read moreore starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installing this part, and be sure to consult your manual before you begin this repair.

This damper is an authentic OEM replacement assembly used in microwave/range hood combos. It includes the damper door and frame. It is designed to direct the flow of air through the vent duct, and the release of steam and heat from the appliance during cooking. Over time, the damper door and frame can wear down or become obstructed by foo...Read mored particles and debris. A faulty damper assembly will result in poor ventilation, uneven cooking, and excessive moisture buildup which can damage internal components in the appliance. Disconnect any wires or connectors attached to the faulty damper assembly and remove it from the appliance. Position the new damper assembly and reconnect the wires/connectors before securing it with the appropriate fasteners.

This is a manufacturer-approved mounting kit for your microwave. This kit is crucial for keeping your microwave securely wall-mounted. This kit does not include the mounting plate itself. This kit comes in handy if you buy your microwave separately from the mounting kit.

Discover the power of a premium-quality appliance part brought to you by Whirlpool. This original upper template is designed for meticulous precision in your microwave installation process. Produced by a leading name in home appliances, it provides clear information on where to drill holes in the cabinet bottom for secure placement of you...Read morer microwave. It's imperative to cross-verify the part number with your specific model before you proceed with the order. Please refer to your microwave's owner manual or installation guide for exact instructions on utilizing this part. Use this template to ensure optimum performance and longevity of your appliance.

Introducing the Interlock Cam Plate, an exceptional component designed and endorsed by the reputable Whirlpool brand. This CAM-PLATE is meticulously engineered to work with select microwaves, specifically from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. Integrated into the functionality of your microwave...Read more's vent louver, this cam plate plays an integral role in the operation of the vent duct. It boasts hassle-free connectivity to the vent drive motor cam and the louver. Please remember this component carries significant importance and due to the risk of high-voltage capacitors holding lethal charge in a microwave, it is recommended to have this part installed by a qualified technician. Enhance the performance and longevity of your microwave operation with this Whirlpool Interlock Cam Plate.

Waterproof seal.

Introducing the Interlock Spring from the trusted and reputable Whirlpool brand. This genuine OEM part is designed to work seamlessly with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef microwaves. The function of this part is critical, as it effectively resets the cam plate for the interlock switc...Read moreh each time you open the microwave door. However, due to the potential of high-voltage capacitors in your microwave retaining a dangerous electrical charge, even when unplugged, it is recommended to have this part installed by a qualified service technician. Kindly ensure to confirm that this interlock spring is the precise part appropriate for your appliance model before ordering. Trust in Whirlpool for high-quality, reliable appliance parts to keep your home running smoothly.

This motor is used to rotate the cooking tray.