WM3075CW LG Washer - Parts

This is a door lock switch, compatible with various models of LG washing machines. This door lock switch is designed to communicate to the control board when the door of the washer is closed, so the door can lock and allow the washing cycle to safely begin. If your washer is having difficulty locking before it begins its washing cycle, or...Read more if it has difficulty starting in general, you may need to replace this lock switch. This switch is made primarily of black, gray, and white plastic, and will require a screwdriver/drill, and a pair of needle nose pliers to replace. This door switch is a genuine OEM part that will require you to disassemble part of your washing machine to completely replace it.

This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tub and the drive shaft. If the gasket is worn or damaged, it may not be able to create this seal, and you may experience a water leak from yo...Read moreur washer. Be sure to disconnect the washer from the water and power sources before you begin this repair. This is an OEM part sourced directly from the manufacturer and it is sold individually.

This dispenser assembly is designed for front-load washing machines to hold and release detergent and fabric softener during the wash cycle. It ensures proper timing and distribution for efficient cleaning performance. Made from durable materials, the housing resists wear and clogging for long-lasting use. If your current dispenser is lea...Read moreking, jamming, or showing signs of damage, replacing it restores optimal function. Confirm your washer’s model for compatibility before installation.

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cov...Read moreer, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.

This washer shock absorber mounting pin secures the suspension damper to the outer tub and base frame, helping stabilize the wash basket and reduce vibration during operation. By maintaining proper alignment of the shock absorber, it helps prevent excessive movement, banging, shaking, and loud thumping noises during high-speed spin cycles...Read more. Replacing a worn, damaged, bent, or missing mounting pin can restore the effectiveness of the suspension system and help protect other washer components from unnecessary stress and wear. Installation typically involves removing the retaining clip, disconnecting the existing pin from the shock absorber mounting point, inserting the replacement pin, and securing it with the appropriate retaining hardware. For best results, inspect the shock absorbers, retaining clips, and mounting brackets for signs of wear or damage and replace any faulty components at the same time to ensure smooth, stable washer operation.

This is a pump bracket damper for models of LG washing machines. This damper is used to protect the pump within the washer from excessive vibration damage during the washing cycle. If your washing machine is vibrating or making an excessive amount of noise during the cycle, these dampers could be worn out and in need of replacement. This ...Read moredamper is made of rubber and measures approximately 1 inch long and 1 inch wide. Replacing this damper will require you to access the underside of the washer, or wherever the pump location is for your model. This OEM damper is sold individually, and most washers use 2-3 of these dampers for the pump bracket, so consider how many you need before ordering.

This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4-1/4 inches by 2-1/4 inches. The fabric softener fits inside the dispenser drawer and holds fabric softener and bleach. The main reason to replace this cap is if it is d...Read moreamaged or missing. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

This washer door boot spring clamp, also known as a retaining, is compatible with various models of LG washing machines. It is an authentic OEM replacement part that is designed to fit just like the original. The spring clamp is a round, stainless steel ring that holds the washing machine door boot in place and prevents it from falling of...Read moref the washer. If the spring clamp is damaged, corroded, or can no longer maintain tension, the door boot will become loose and may fall off leading to leakages and difficulty opening and closing the washer door. You will need a spring clamp removal tool to safely complete this repair.

This genuine OEM washer drain pump housing provides a secure mounting base for the drain pump, filter, and connected hoses, helping ensure proper water drainage during wash cycles. Made from durable plastic, it plays a key role in preventing leaks and supporting smooth pump operation. Replacing a damaged or worn housing can resolve issues such as water leaks, noisy operation, or failure to drain properly.