WM2240CS LG Washer - Parts

This dispenser assembly is designed for front-load washing machines to hold and release detergent and fabric softener during the wash cycle. It ensures proper timing and distribution for efficient cleaning performance. Made from durable materials, the housing resists wear and clogging for long-lasting use. If your current dispenser is lea...Read moreking, jamming, or showing signs of damage, replacing it restores optimal function. Confirm your washer’s model for compatibility before installation.

This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduc...Read moretion. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.

This clamp assembly secures hoses, boots, or fittings in place to prevent leaks and maintain proper connections. Designed for a tight, reliable hold, it is replaced when clamps loosen, corrode, or fail.

This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4-1/4 inches by 2-1/4 inches. The fabric softener fits inside the dispenser drawer and holds fabric softener and bleach. The main reason to replace this cap is if it is d...Read moreamaged or missing. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

This drain hose is a genuine OEM replacement part that is specially made for LG washing machines. It is a flexible rubber pipe designed to remove wastewater from the washer. When the washing machine goes through its drain cycle, water is pumped out of the drum and into the drain hose assembly, which then directs the water out of the machi...Read morene. The drain hose is attached to the back of the washing machine at one end and connected to a drain pipe or standpipe at the other end. The hose assembly includes one standard connector at one end of the hose and an elbow fitting on the other. These connectors ensure that the hose remains securely attached to the washing machine and the drain pipe to prevent leaking, and kinks, and to ensure efficient drainage.

Sold individually.