WLW2500PD Hotpoint Washer - Parts

This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise. If you have a top-load washer, a drive belt may be connecting the transmission to the drive motor. It would generally be a rubber V-belt covered in fabric to a...Read morellow free movement. Or it could be a rubber belt aided by a tensioning device like an idler pulley, to stop the motor from causing too much friction to the belt. For front-loaders, the drive belt goes between the drive motor and the wash basket. If your drive belt is worn or frayed, it should be replaced straight away. After replacing the drive belt, run a wash cycle to ensure the belt is correctly fitted.

This washing machine water inlet valve has two ports for water to enter.

This washing machine pump is white in color and has four ports for water to pass through.

This coupling is used for 20 spline drive shaft transmissions.

Includes 2 hoses that are 4 feet long, and 4 seals.

This coupling helps connect the pump to the motor.

For 1 or 2 speed.

2 PK - Stainless Steel 4 ft Hoses