WISCW4 Frigidaire Washer - Parts

The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve is in any way damaged or defective, it may be slow to fill or even leak. Before beginning this replacement, make sure to unplug the washer fr...Read moreom the power range or shut off the house circuit breaker. Remember to wear gloves for safety. Refer to the installation instructions and the diagram provided by the manufacturer for best results and accuracy.

This is a transmission to tub seal kit, often referred to as a center tub seal kit, and it is used in washing machines to create a seal between the transmission and the tub. This seal works to prevent leaks from around the basket drive shaft, between the outer tub and the spin basket. We reccomend that you replace the tub seal kit if you ...Read moreare replacing the transmission. The kit includes the instructions you will require for installation. Before you begin the repair on your washer, make sure it is unplugged and the water supply is shut off.

This two speed motor is used in washing machines. The motor is the main unit in a washer that monitors and controls the whole device such as the agitator, gearbox, pump, and clutch. This two speed motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the second speed. It carries 115 volts and runs 1/2 ...Read morehorse power. If your washer will not spin or pump, pumps, but does not spin, will not agitate, or your clothes come out of the washer wet, replacing this part can solve the problem. Remember to unplug your washer from the power source before beginning this installation. Refer to the manual provided by the manufacturer for installation instructions.