This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair o...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers.
Shock absorber absorbs the vibrations and movements of the oute...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens ...
This part is the replacement drive belt for your washer. It is made of black rubber and is approximately ½ an inch wide and 48 inches long. It has 6 grooves and is sold individually. The drive belt is...
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place o...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anna
December 8, 2019
What is the problem with the washer when the add garment and door lock lights are on.
For model number WFW9150WW00
Hello Anna,
Thank you for your question. Our sources suggest that the electronic control board under part PS11750474 for your model is defective and would need to be replaced. Hope this helps!
Hi Rich,
Thank you for your question. There are 4 shock absorbers listed for your washer. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Teresa
December 17, 2019
What might cause the washer water levels to rise to high?
For model number WFW9150WW00
Hello Teresa and thanks for writing.
It certainly sounds like a faulty water-level pressure switch PS11749322 check for signs of damage and replace it if needed. We hope this helps. Please contact us anytime.
Se quemo la tarjeta no. W10384843. necesito reemplazarla pero no la consigo.
I burned card no. W10384843. I need to replace it but I can't.
For model number WFW9150WW00
Hello Carmen, thank you for your question. We do have the Motor Control Board PS11754006. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hola Carmen, gracias por tu pregunta. Tenemos la placa de control del motor PS11754006. Si necesita ayuda para realizar un pedido, el servicio de atención al cliente está abierto los 7 días de la semana. No dude en llamarnos. Esperamos con interés escuchar de usted.
Hello Vaughnly, thank you for contacting us. We would recommend checking the following parts to fix your issue: Drain Pump, part number FIX11757304, Drive Belt, part number FIX11746258, and Motor Control Board, part number FIX11754006. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Removed the front panel unplugged The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff