Part Location Diagram of WPW10730972 Whirlpool Washer Drain Pump
See part 14 in the diagram
Replacing your Maytag Washer Washer Drain Pump
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Washer Drain Pump WPW10730972

 Fits your WFW9150WW00!
★★★★★
★★★★★
104 Reviews

Rated by 33 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 150.51
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WFW9150WW00!
PartSelect Number PS11757304
Manufacturer Part Number WPW10730972
Manufactured by Whirlpool
Product Description

Washer Drain Pump Specifications

This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair of pliers. Make sure to disconnect power to the washer before beginning this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Washer Drain Pump

Replacing your Maytag Washer Washer Drain Pump
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Burning smell | Will Not Start
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Whirlpool, Kenmore, Inglis.
Part# WPW10730972 replaces these:
AP6023956, 8540024, 8540025, 8540027, 8540028, 8540996, W10117829, W10130913, W10183434, W10190647, W10190648, W10201457, W10730972, WPW10730972VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
104 Reviews
4.7
Filter By Rating:
  • 5 Stars
    86
  • 4 Stars
    13
  • 3 Stars
    2
  • 2 Stars
    2
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 33 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
no drain, and pin hole in hose causing slight leak
The most time consuming part was fitting the hose back on because of the confined space. Once on the rest was a snap. The drain pump installed just the same as the video, so watch the video! I think in total it took about 30 minutes to complete.
Other Parts Used:
HOSE Washer Drain Pump
  • Debbie from MOUNT VERNON, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump stopped draining washer
Unplugged washer , used shop vac to drain water through drain hose on washer. Removed both hoses from old pump. Removed electric plug, removed 2 screws from bottom of the pump. Then reverse the process.
  • Tom from HEBRON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump would not pump out the water in the tub
just changed out the pump. easy
  • Ron from LITTLETON, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer would'nt drain
Son-in law did the work he was finished in about 20 minutes the repair guy wanted $249.00 to take out and put in. PLUS part.
  • RICHARD from SANTA CLARITA, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It wouldn't drain anymore so I started looking on the internet for a solution. I came upon this website and found the part I needed. It was easy to install. It fixed the problem I had with the washer.
I just took off the old part and installed the new one. The new part was a bit different.
  • Ricardo from DETROIT, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F 21 code kept appearing even though trap clean out was clear.
Replaced drain pump took longer to soak up water than actually replacing the pump motor with mine having the pedestal underneath I did not have to tip the washer at all so it was fast and easy. Three screws taking the front cover off a screwdriver lifting the Rubber and sliding the motor off and pair of pliers 4 to hose clamps making it a breeze.
  • Michael from LUCKEY, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain flashing f-21 code
Took it old pump and replaced with new pump VERY EASY
  • Casey from REXBURG, ID
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem as instructed.
As video instructed
  • John from BOYLSTON, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace the pump motor
First tilt the washer back so you can drain water from the lines to the pump and the pump itself. Disconnect the lines with a pair of pliers and use a screwdriver to move the rubber stopper so that the pump will move to the right. With pump now in position to lift up and out of the washer , do it so you can disconnect the wire assembly. Replace the pump starting with the wires, then slide it in place and secure it with the rubber stopper. Attach the lines and make sure they are well sitted and clamped. set on feet and you are ready to wash.
  • Jay from MALVERN, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer drain pump had to be replaced.
Unplugged the washer from electric outlet. Removed front cover by using nut driver to remove the two screws. Drained the water from the washer into a pan by loosening the cap on the filter. Removed the two hoses by compressing clamps with pliers. Unplugged the electric wire from old pump. Used screw driver to pry rubber feet of old pump loose from washer floor panel. Set old pump aside. Installed new pump using a little dish soap to help attach rubber feet to washer. Attached the two hoses using pliers. Plugged electric wire into new unit. Ran washer to check for leaks. Replaced front cover using nut driver on the two screws.
  • John from ARMINGTON, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

57 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
December 5, 2018
Code#f9e1
PartSelect logo
Hi Samuel, Thank you for your question. The F9 E1 error code is referring to a long drain. If the drain exceeds 8 minutes, the valves will turn off and the pump will stop running. If too much soap was used, the excess suds can cause this code to appear. You should also check to see if the drain hose is blocked or has a kink in it. Make sure the drain hose is not sealed into the drain pipe. Make sure the drain hose does not exceed 96 inches. Make sure that their is no debris in the drain pump. Check to make sure the pressure hose is not pinched, kinked, plugged or leaking air. I hope this helps. Thank you and have a great day!

43 people found this helpful.

Was this helpful?
Thank you for voting!
Kenny
February 20, 2018
I keep getting codes f21 and sd . Drain hose are not in a bind and not extra suds. Can you give me any idea? Most often the f 21 code. Thanks Kenny
For model number WFW8410SW01
PartSelect logo
Hi Kenny, Thank you for the question. F21 means the washing machine has a water draining issue. The drain pump itself, or the drain hose is clogged. Since the hose is good, I suggest checking the drain pump, if the pump is not clogged you may need to have it replaced. At times suds can build up in the pump and the machine finds it really hard to clear them out. You may need to remove it and clean it out manually. Also make sure you are using the correct type of detergent in the correct amounts. Hope this helps!

29 people found this helpful.

Was this helpful?
Thank you for voting!
Terry
November 23, 2017
Do you sell the plug that screws in the front of the drain pump? It has a crack in it from the old owners taking a pair of pliers to remove the plug.
For model number WFW9250WW00
PartSelect logo
Hi Terry, Thank you for the question.The Pump Filter is not sold sepratly from the pump assembly. In order to have it replaced you will need to order a new pump. Hope this helps!

18 people found this helpful.

Was this helpful?
Thank you for voting!
Rudy
November 6, 2017
My washer is not working, it locks the door but it will not start. What can be the issue i replaced the lock panel and that wasn't the problem what part do you suggest is failing?
For model number Wfw9150ww01
PartSelect logo
Hi Rudy, Thank you for your inquiry. Where you have already replaced the the there are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature sensor, the drain pump, the door strike and the drive belt. I hope this helps. Thank you and have a great day!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Sheila Oakley
July 31, 2018
My washer will only spin one time then stop.The door will lock ,make a humming noise then starts to beep.Water is still in the washer.
For model number Wfw9050xw00
PartSelect logo
Hi Sheila, Thank you for your question. If the washer is only spinning once and then stops, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the drain pump, the drive belt, and the door lock latch. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
April
December 13, 2017
Has anybody had the impeller fall off .Got a new pump assembly washed 2 loads of clothes when it wouldn't pump again do to impeller loose
For model number wpw 10730972
PartSelect logo
Hi April, Thank you for your question. Yes, sometimes they do break off. Before checking to see if they are broken, unplug the appliance from the electrical outlet and pull it out from the wall. To verify if they are broken, put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you'll be able to feel them while you are turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing. There is a video on our website that you can reference on how to remove and install a washing machine drain pump so you can check the impellers. The washing machine may not show exactly like the one you have and the pump may be different, but it will give you a general idea on how to install the part. You will find the video under part number PS11757304. I hope this helps. Thank you and have a great day!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Bill
January 10, 2019
Washer seemed to be running longer than normal. Put my hand on the drain pump. It was hot. Is that normal. It works and drains the tub.
For model number WFW9150WW01
PartSelect logo
Hello Bill, thank you for your question. You may want to remove the pump to be sure there are no blockages. The pump will get warm but shouldn't be hot to the touch. I hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Jesus
April 11, 2018
This washer stop pumping water. A new pump was installed. The hoses were checked for clogging and were found to be free. After the new pump installation the washer still does not empty the water. Please advise. Thanks jesus.
For model number WFW9150WW00
PartSelect logo
Hi Jesus, Thank you for your question. If you have replaced the pump and the water is still not pumping out, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the temperature sensor, the trap and the water level pressure switch. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
David
August 27, 2019
Hi, i am searching for the drain pump on my washing machine, part #w10130914 but can’t seem to find a replacement? Has it been replaced with a different part #? Thanks
For model number Maytag 3000 series front load
PartSelect logo
Good Day David. Thank you for your question in regards to your unit. In order for us to assist you we will need the full model number of your unit so we can research into finding the right compatible parts. If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.

3 people found this helpful.

Was this helpful?
Thank you for voting!
David
June 27, 2019
Cant i just replace the moter
For model number 11047512601
PartSelect logo
Hello David, thank you for writing. The Drive Motor for your model is part PS11748956.

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757304
Manufacturer Part Number: WPW10730972
Brand
Model Number
Description
Kenmore
11041932510
Washer - COMMERCIAL WASHER
Kenmore
11041942710
Washer - WASHER
Kenmore
11046462500
Washer
Kenmore
11046462501
Washer
Kenmore
11046472500
Washer
Kenmore
11046472501
Washer
Kenmore
11047511700
Washer
Kenmore
11047511701
Washer
Kenmore
11047511702
Washer
Kenmore
11047512600
Washer
Kenmore
11047512601
Washer
Kenmore
11047512602
Washer
Kenmore
11047512603
Washer
Kenmore
11047512604
Washer
Kenmore
11047512605
Washer
Kenmore
11047531700
Washer
Kenmore
11047531701
Washer
Kenmore
11047531702
Washer
Kenmore
11047532600
Washer
Kenmore
11047532601
Washer
Kenmore
11047532602
Washer
Kenmore
11047532603
Washer
Kenmore
11047532604
Washer
Kenmore
11047532605
Washer
Kenmore
11047542600
Washer
Kenmore
11047542601
Washer
Kenmore
11047542602
Washer
Kenmore
11047542603
Washer
Kenmore
11047542604
Washer
Kenmore
11047542605
Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service