Models > WFE515S0ES0

WFE515S0ES0 Whirlpool Range - Overview

Sections of the WFE515S0ES0

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(66)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.75
  In Stock
Surface Burner Element Switch, Large Burner – Part Number: WP3149400
Surface Burner Element Switch, Large Burner
★★★★★
★★★★★
(42)
PartSelect #: PS11740783
Manufacturer #: WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before comple...
$95.44
  In Stock
Oven Sensor – Part Number: WPW10181986
Oven Sensor
★★★★★
★★★★★
(36)
PartSelect #: PS11749737
Manufacturer #: WPW10181986
This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the followi...
$94.86
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.83
  In Stock
Terminal Block – Part Number: WPW10245259
Terminal Block
★★★★★
★★★★★
(17)
PartSelect #: PS11750972
Manufacturer #: WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
$34.15
  In Stock
Door Hinge - Active With Spring – Part Number: WPW10299224
Door Hinge - Active With Spring
★★★★★
★★★★★
(14)
PartSelect #: PS11752376
Manufacturer #: WPW10299224
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this pa...
$58.87
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(2)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.02
  In Stock
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(4)
PartSelect #: PS971245
Manufacturer #: 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
$37.58
  In Stock
Infinite Control Switch, 6" – Part Number: WP3149404
Infinite Control Switch, 6"
★★★★★
★★★★★
(10)
PartSelect #: PS11740785
Manufacturer #: WP3149404
This switch controls the stove top 6" surface burner.
$58.11
  In Stock
Broil Element – Part Number: W10856603
Broil Element
★★★★★
★★★★★
(6)
PartSelect #: PS11731333
Manufacturer #: W10856603
This broil element supplies heat for cooking purposes and is located in the roof of an oven. If you find there is little to no heat when cooking, a burned-out element, or food is taking too long to co...
$136.60
  In Stock
SOCKT-LITE – Part Number: W11594027
SOCKT-LITE
★★★★★
★★★★★
(12)
PartSelect #: PS16730838
Manufacturer #: W11594027
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
$59.75
  In Stock
RACK-OVEN – Part Number: W11520287
RACK-OVEN
★★★★★
★★★★★
(3)
PartSelect #: PS16543561
Manufacturer #: W11520287
Sold individually.
$35.28
  In Stock

Questions And Answers for WFE515S0ES0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

10 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
February 8, 2023
My front burner doesn't regulate properly it goes from medium to high heat without being changed. Do I need to replace the burner or the regulater?
For model number WFE515S0ES0
PartSelect logo
Hello Donna, thank you for the question! According to our research on your model, the issue is probably related to the right front switch, part number PS11740783, and left front switch, part number PS11740785.The control switch turns the surface element on and off and controls how much heat the element produces. We hope this solves your problem!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jose
November 4, 2021
I have a oven whirpool wfe515s0es0 the right rear element does not regulate the temperature when i turn it on it goes to maximum heating. Which will be the part i need to solve the problem. Also the front left element does not work what part should i buy for this? Thank you
For model number WFE515S0ES0
PartSelect logo
Hello Jose, thank you for your question. The right rear switch is part number PS11740785. For the front left element it will either be the switch, part number PS11754687 or the element, part number PS16543522. You can test the front left switch with an ohmmeter. First unplug the appliance or turn off the breaker. Remove all wires from the switch terminals. (Remember to label them!) Set the infinite switch on high and place your ohmmeter on the L2, H2, P and H1 terminals to check for continuity. If there is no continuity between L1 and H1 or between L2 and H2, the infinite switch is defective. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Fred
November 8, 2021
Right front burner 9" does not regulate properly. It's either off or on high, no in between. Need part number.Thank you.
For model number WFE515S0ES0
PartSelect logo
Hello Fred, thank you for your inquiry! The right-front burner part number is PS11775308. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Howard
January 21, 2020
What part number do i need? The picture here is different than my range.
For model number WFE515S0ES0
PartSelect logo
Hello Howard, Thank you for the question. In order to help you, we will need to know what part you are needing. Please submit a new question if you have any follow ups. We are looking forward to hearing from you.

Was this helpful?
Thank you for voting!
Steve
January 7, 2020
My stove burner stays on high on all 3 settings . That's on my glass top and the 2nd large burner
For model number WFE515S0ES0
PartSelect logo
Hello Steve and thank you for writing. It certainly sounds like it could be a faulty element PS11764929, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the WFE515S0ES0

[Viewing 10 of 10]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Will not program
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
temperature not accurate after 3 1/2 years of happy usage
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Parts Used:
Oven Sensor
  • Ruth from Oregon, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
139 of 247 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Parts Used:
Insulation
  • Wendy from Red Hook, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
100 of 138 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the element did not turn compleatly off, the on light stayed on.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
Parts Used:
Surface Burner Element Switch, Large Burner
  • chaz from fairplay, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
83 of 100 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!