WF45R6300AC Samsung Washer - Parts

This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing the entire spider arm assembly, make sure you order as many hex bolts as you will need. The spider arm assembly contains 6 of these hex bol...Read morets. The hex bolt or spider arm assembly may need to be replaced if you notice that your inner tub is going out of balance. The hex bolt measures 1.5 by 0.5 inches.

This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made of metal and features a spring in the middle, but over time can be worn down or break, and result in water leaking out of the washing machine...Read more and into your home. Replacing this clamp will require a screwdriver, pliers, and safety gloves. This clamp is an OEM part that comes individually, without any other parts or accessories.

One solenoid valve for hot water

The drain pump removes water from the washer during the drain portion of the cycle.

Assembly BOLT;SWF-P12,MOTOR/

This weight balancer, also known as a counterweight, is specially designed for use with Samsung washers. It is one of two balancers that are positioned around the washer drum. The weight balancer helps to distribute the weight of the laundry load evenly and absorbs the shocks and vibrations that are produced while the washer is running. T...Read morehis process helps to prevent excessive movement to ensure that the unit remains stable and safe from potential damage and premature wear. It also prevents the washer from becoming disruptively noisy. The counterweight will need to be replaced if it is worn down, damaged, or can no longer stay securely attached to the washer. Each weight balancer is sold individually.

This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.