- Home
- WF45N6300AV
- Instructions
WF45N6300AV (A5) Samsung Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water leak from torn front diaphragm
7 of 8 people
found this instruction helpful.
-
Gumecindo from SALINAS, CA
- Easy
- 1- 2 hours
-
Pliers, Screw drivers
Unplug electrical cord. Remove top of washer. Remove soap dispenser tray. Remove control panel, disconnect electrical harness from back of panel.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Read less
Was this helpful?
Thank you for voting!
Washer making noise a snow smoking.
18 of 79 people
found this instruction helpful.
-
Samuel from NEEDVILLE, TX
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Screw drivers, Socket set, Wrench set
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Was this helpful?
Thank you for voting!