WF45N5300AF (US-00) Samsung Washer - Overview

This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made of metal and features a spring in the middle, but over time can be worn down or break, and result in water leaking out of the washing machine...Read more and into your home. Replacing this clamp will require a screwdriver, pliers, and safety gloves. This clamp is an OEM part that comes individually, without any other parts or accessories.

One solenoid valve for hot water

Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in place during the wash, rinse, and spin cycles. If this suspension is damaged during shipping, the tub can shake and move, tilt to one side, or...Read more spin incorrectly. This could lead to the suspension or motor failing. When moving your washer, it is suggested that you insert the shipping bolts back into place before moving the machine. This part is also called a washer transit bolt. Remember that this part is sold separately, and to check your model to see how many you require.

The drain pump removes water from the washer during the drain portion of the cycle.

The control knob lets you control cycle settings.

Three solenoid valve for cold water

This drain cap is a genuine replacement part made for Samsung washers. It is a small plastic cap, approximately 1.5 inches long, that fits onto the end of the washing machine drain hose. The cap is responsible for sealing the end of the hose. It prevents water from leaking out onto the floor and it also prevents insects, dust, and debris ...Read morefrom entering and blocking the drain hose. If you notice water leaking from your washer when it is not in use, or mold growth at the end of the hose, the cap is likely faulty and will need to be replaced. You can access the drain cap by opening the access panel at the bottom of the washer.