EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WD-1070FH LG Washer - Instructions

All Instructions for the WD-1070FH
1 - 4 of 4

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bearings were going out. Washer made extremely loud noise while spinning at high or medium speed. Also had burning smell when spinning
8 of 11 people found this instruction helpful.
  • David from BOWLING GREEN, KY
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I followed the 35 min video on front loader bearing and seal replacement to a T. I went step by step pausing the video as the technician completed the task. It took 5 hours for me to complete which included the cleanup time. I am extremely happy how this turned out. It runs as good as a new machine. I did however find that our particu lar machine had an extremely large amount of mildew and mold inside the outer tub casing and attached to the spider arm. More than likely after seeing all this mold when it comes time for the next repair we will probably buy a new top loader. The repair parts and video were perfect! Thanks for the help. Local repair company recommended to me to just buy a new washer when I inquired about them repairing.
Was this helpful?
Thank you for voting!
Drum spring broke
4 of 4 people found this instruction helpful.
  • Todd from LAKEWOOD, CO
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Removed top panal found broken parts and pieces, replaced spring and plastic spring holder. Straightened out and reattached drum front boot.
Was this helpful?
Thank you for voting!
While replacing the tub support (spider) I chose to replace the gasket.
2 of 2 people found this instruction helpful.
  • Robert from HYDE PARK, VT
  • A Bit Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set
The spider repair and the tub seal replacement are fairly complicated, and time-consuming, but manageable with patience. I viewed the youtube video that showed the process, which gave me confidence. It entails disassembling the machine and removing quite a few major pieces. Take care with the numerous screws and bolts, and be patient and you can be successful. Plan a lot of time for all the steps.
The hardest part is putting the door bellows back on.
Was this helpful?
Thank you for voting!
All Instructions for the WD-1070FH
1 - 4 of 4