WBB24751 (06) Bosch Washer - Parts

The hinge is mounted on the front of the washer, and the door is installed onto the hinge. When the hinge on a washing machine is broken or bent the door may not swing properly, and it may not close. If your door will not close your washer will not run, so you will need to replace the hinge on your appliance. Make sure you save the white ...Read moreplastic cap bushings from the old hinge, as you will need to install those on your new hinge, they are not included. This hinge is made of metal, and the screws you will need install it are included.

This is a bellow assembly, also known as a door boot gasket kit, and it is designed for use with front load washers. This gasket acts as the main seal between the door of the washing machine and the wash tub. This seal might wear out over time, or it might be damaged, resulting in water leaking from around the door during the wash cycle. ...Read moreIf you notice leaks coming from the door it may be time to replace the door boot gasket on your washer. This kit includes the seal, the front and rear spring clamps, and installation instructions.

Front-loading washing machines use a suspension system to support the tub during the wash cycle. This suspension system is only designed to handle a certain amount of movement, so when you are transporting or moving the machine you will need shipping bolts to hold the tub in place. Using shipping bolts will help you limit any potential da...Read moremage that can be done to the suspension system during transport. This shipping bolt is comprised of three pieces, the bolt, the washer and the sleeve. You will need four of these bolts to hold the tub of your front load washer in place for moving.

Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.

This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.