VT615208 (2003) Campbell Hausfeld Compressor - Parts

This genuine OEM replacement nipple is designed for use in air compressors, serving as a critical connector between the pressure switch, the tank, and the regulator. A damaged or corroded nipple can lead to air leaks and inconsistent pressure, affecting overall performance. To check for leaks, apply soapy water to the fittings around the ...Read morepressure switch and watch for bubbles. If replacement is necessary, the process typically involves disassembling the pressure switch. Begin by draining the tank using the valve at the bottom, then remove the coupler from the regulator and unthread the nipple. Access the wire connections by removing the pressure switch shroud, and carefully note the position of each wire before disconnecting them—starting with the motor wire, followed by the cord wires and ground wires. Remove the strain relief, pressure gauge, and the airline connecting the check valve to the switch. Finally, unthread the pressure switch from the tank nipple and remove the nipple itself. When reassembling, it is recommended to use thread tape to ensure a proper seal. This replacement part is sold individually.

Svc Compressor Pump Cw 75 X 51Mm

This is an authentic Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The metal cap assembly is used to support the crankshaft bearing to keep the shaft in position on the wall of the crankcase. This item is available as an individual replacement part.

This is original Campbell Hausfeld replacement part manufactured for use with air compressors. The filter is prevents dirt from entering the air intake on the pump. Replacing the filter is part of normal air comrpessor maintenance, please note the filter is sold individually.

This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special set screw is commonly used to secure the pump's flywheel. This set screw is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied by the original equipment manufacturer for use with Campbell Hausfeld air compressors. This is an identical replacement for a missing or a faulty inlet filter that was installed on a new unit. It is an important component that helps to ensure that the air that goes through the unit is free of dust and...Read more other harmful contaminants. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality inlet filter is sold individually.