VT20KA484 Exmark Lawn Mower - Parts

This Belleville washer, also called a disc spring or conical spring washer, is a component in your lawn equipment that distributes load and keeps tension in check in areas where controlled compression is needed such as in suspension systems and blade assemblies. If the washer is damaged, showing signs of deformation, cracks, or warping, y...Read moreour machine will have no cushioning between their parts and your machine will wear out faster. Use a pair of pliers or a flathead screwdriver to remove a washer from your machine. If it is stubborn, apply some penetrating oil to help loosen it. Remember to consult your user guide to determine how many washers you need and where they are in your machine. Since these washers are sold individually, it is strongly recommended that you replace all your washers in one go as they wear out at the same rate.

The screw attaches to the caster fork. It is an original Toro and Lawn Boy part for use in lawn mowers and lawn tractors. This item is available as an individual replacement part. During replacement, it may require a wrench to help install this item correctly. It is made out of metal and will need to be replaced if it breaks or strips.

This authentic manufacturer-sourced nut-lock is made for use with Toro and Lawn-Boy snowthrowers. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this nut-lock. It is made of dur...Read moreable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This is an authentic HHHH replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special lock nut is used with several different types of equipment and the application of the nut can vary based on the model of the tool. This lock nut is available as an individual replacement part.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal washer is commonly used to disperse pressure put on the auger housing by the nut that fastens the chute retainer across a wider surface area. This bolt is sold individually.

This is an authentic Toro replacement part manufactured for use with snowthrowers. The special screw is commonly used to secure idler pulleys either near the engine or on the frame. This screw is used with different models of snowthrowers and pulley this screw can vary depending on the model of machine. The screw is available as an individual replacement part, please see model diagram for part location and usage.

It is an authentic replacement part that is supplied directly from the original equipment manufacturer for use with Toro lawn mowers. This is the special screw that is generally utilized to secure the pivot-arm, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is a ...Read morehigh-quality component which is made of durable metal and is sold individually, you will need a wrench to secure or remove it.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The valve is part of the tire assembly and is used to regulate tire pressure by allowing air into the tire and preventing air from escaping. This valve is available as an individual replacement part.