UCG1600LWW General Electric Trash Compactor - Parts

Fits round or rectangular compactors.

This frame roller assembly allows a trash compactor drawer to glide smoothly in and out, reducing strain and preventing grinding or squeaking noises during operation. When the rollers wear down, the drawer may feel difficult to move, sit unevenly, or produce unusual sounds. Replacing the assembly restores proper movement and helps the com...Read morepactor operate quietly and reliably. Installation is straightforward and typically involves removing the old rollers and securing the new assembly in place.

This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige, and roughly 3 inches wide, and almost 2 inches long. For this repair, you will need a screwdriver set or a multi-screwdriver, a quarter-in...Read morech nut driver bit, and a flat-head bit. You will need to get inside of your trash compactor in order to replace this part. This means uninstalling your appliance from your cabinets.

This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is not completing the compact cycle properly, you may have to test the switch. If you have a multimeter, you can perform a continuity test bef...Read moreore ordering this part to determine if a continuous electrical path is present in the switch. If there is no electrical path in your switch, you will need to replace it. This is an authentic replacement part sourced directly from the original manufacturer.

The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.

Screws included.