UCC15NPRBII General Electric Ice Maker - Parts

This OEM filter is sold individually. Change your filter every 6 months for the best results. This filter is found in top-freezer and bottom-freezer refrigerators located in the back upper right corner. It measures 4.75-Inches deep, 9.5-Inches high, and 5.25-Inches wide. It is certified to reduce particles, chlorine-resistant cysts, lead ...Read moreand five other impurities. The pressure requirement is 40-120 PSI (if yours exceeds this, you will need to install a pressure-timing valve), and the operating temperature needs to be 33-100 degrees Fahrenheit. It filters down to 0.5-1 microns. The installation is simple and does not require any tools or mess. To remove the old cartridge, turn it to the left and pull down carefully. Some water might drip, so keep a cloth handy. To install the new filter, place it into the cartridge holder and turn to the right until it will no longer turn. If you have a top-freezer model it should be situated vertically, and if it is a bottom-freezer model, it should be placed horizontally. Be careful not to over-tighten. If your model has a replacement indicator light, reset it by pushing and holding it down for three seconds. If your model has a dispenser, run water through it for approximately 3 minutes to clear the system. Please note that this filter will not work in Kenmore brand models.

The water filter head and tubing holds the water filter and comes with the water lines.

The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.

This water valve controls the intake of water into the appliance to ensure accurate filling and leak prevention. Reliable valve operation supports consistent performance and protects internal components. Replacing a worn valve restores dependable water flow.

This refrigerator main control board manages essential cooling functions, including compressor operation, fan control, defrost cycles, and temperature regulation. It is commonly replaced when the refrigerator experiences cooling issues, inconsistent temperatures, or erratic operation. Designed as a precise OEM replacement, the board helps...Read more restore reliable performance and proper communication between internal sensors and components. Installation requires disconnecting power to the refrigerator and is recommended for qualified service technicians. Size, dimensions, and color may vary by model.