Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic clips had broken, causing bottom skirt piece to fall off.
28 of 29 peoplefound this instruction helpful.
William from Greensboro, NC
Really Easy
Less than 15 mins
After attempting to order this part from Whirlpool twice and twice receiving the wrong thing, found correct part on PartSelect in about one minute. Shipment came fast and the repair was very simple, under five minutes. You just pop the pieces in place and snap the piece back onto the oven.
Was this helpful?
Thank you for voting!
Rubber gasket failed due to age
14 of 18 peoplefound this instruction helpful.
Mary from Woodland, WA
Really Easy
Less than 15 mins
Screw drivers
I learned that I could clean the window in the oven door. In taking it apart I saw that the gasket had fallen into the oven door. I found the part online, it arrived in three days. I removed the metal part of the door, removed what was left of the old gasket and put in the new one. Put the metal part of the door back on, and it was as g
... Read moreood as new.
Read less
Was this helpful?
Thank you for voting!
leak
12 of 14 peoplefound this instruction helpful.
George from Plainville, MA
Really Easy
Less than 15 mins
Screw drivers
removed then installed new unit by hand. received order the next day-am. delivery time great.
Was this helpful?
Thank you for voting!
Purchased home but stove had no broiler pan.
16 of 33 peoplefound this instruction helpful.
Raymond from BLOOMINGTON, MN
Very Easy
Less than 15 mins
Purchased 2 piece broiler pan from this site
Was this helpful?
Thank you for voting!
the burner knobs broke off
10 of 17 peoplefound this instruction helpful.
Belinda from Downey, CA
Really Easy
Less than 15 mins
I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....
Was this helpful?
Thank you for voting!
30 year old gas stove needed a new burner assembly.
6 of 7 peoplefound this instruction helpful.
Caroline from South Windsor, CT
Really Easy
Less than 15 mins
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!
Was this helpful?
Thank you for voting!
light bulb in water ice freezer door went bad
8 of 14 peoplefound this instruction helpful.
Carl from RIVERSIDE, CA
Very Difficult
More than 2 hours
Screw drivers
I didn't. Don't know how to get to light bulb to change it for this specific model
Was this helpful?
Thank you for voting!
Gas manifold had holes in it.
5 of 6 peoplefound this instruction helpful.
Mr. J.C. from Haines City, FL
Really Easy
Less than 15 mins
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.
Was this helpful?
Thank you for voting!
A high flame was coming out of the side of the burner
5 of 7 peoplefound this instruction helpful.
KAY from BRIDGEPORT, CT
Really Easy
Less than 15 mins
Easy......pulled out the old one easily and popped in the new one.......saved a lot of money...no repair bill for either diagnostic fee or assembly fee ...No mark up for the part either. Very happy mom!
Lower panal would not stay in place because plastic fastners were gone.
4 of 5 peoplefound this instruction helpful.
siri from remsenburg, NY
Really Easy
Less than 15 mins
I inserted the door strikes in the proper position and then snapped the panel in place.
Was this helpful?
Thank you for voting!
Heat was escaping from my oven and really heating up my house
5 of 8 peoplefound this instruction helpful.
Patricia from Sanger, TX
Really Easy
Less than 15 mins
The heat sealing strips are elastic type material with hooks on each end. I simply removed the old strips and hooked the new ones in place. It was easier than I ever dreamed possible! And my kitchen is now nice and cool. Pat Morrison Sanger TX
Was this helpful?
Thank you for voting!
Freont Burners Of Both Units Had Rusted Though Over The Years Of Boilover.
3 of 4 peoplefound this instruction helpful.
Angelo W. from Chirfland, FL
Really Easy
Less than 15 mins
Lifted lid, removed old burner units, replace with new ones. In less than two min. Was back up and cooking.
Was this helpful?
Thank you for voting!
Replacing the bulb in the freezer side
5 of 11 peoplefound this instruction helpful.
Yafa (and David) from Bothell, WA
Easy
Less than 15 mins
Nutdriver
Removed the ice brucket, Removed the light shield by releasing one screw using a nutdriver. Replacing the bulb and reinstalled the light shield.
Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Was this helpful?
Thank you for voting!
I needed a broiler pan
4 of 9 peoplefound this instruction helpful.
Rhoda P. from Secaucus, NJ
Really Easy
Less than 15 mins
I took the broiler pan out of the shipping container and put it in the oven.
My Orders
