TX4000FD Shimano Spinning Reels - Parts

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This is a genuine Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The handle screw lock fits into the body of the reel and is used to secure the handle screw. This item is sold as an individual replacement part.

This item is available as an individual replacement part. The screw attaches to the bail trip strike. A screwdriver will be necessary during the installation of this item. It is made of metal and will require replacing if it breaks or strips. This is a genuine Shimano part sourced directly from the manufacturer for use in reels.

This is an authentic Shimano replacement part that is sourced from the original manufacturer for use with spinning reels. The metal line roller connects to the bail arm and is used to guide the line as it revolves around the spool when reeling in line. This item is available as an individual replacement part.

The bail spring goes next to the bail spring guide A support. This item is made out of metal and is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with Shimano reels. During replacement, it may require a screwdriver to help install this part correctly. Over time this part may bend or break and will need to be replaced.

This line roller spacer is a genuine item that is supplied by the original equipment manufacturer for use with Shimano spinning reels. It fits between the line roller and the line roller washer and helps to reel in the line. The spacer is a very small part and will need to be replaced if it gets lost and a screwdriver may be needed during...Read more the replacement of this part. This spacer is made of plastic and is sold individually.

This is an authentic Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The metal screw is used to fasten the top portion of the rear cover to the body of the reel. This item is available as an individual replacement part.

This is a Genuine Manufacturer Sourced replacement part used on Shimano Spinning Reels. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces...Read more friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver. First you would need to disconnect the Reel Handle. Then remove the Side Cover by loosening the Screws that hold it. You should be able to remove the old Bearing. Install new Bearing and Reassemble the Reel

This replacement ball bearing is an authentic Shimano component which is designed for use with fishing reels. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may ...Read moreinclude squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. A screwdriver will be needed to perform this repair. Make sure to refer to the appropriate diagram for your model to ensure the proper replacement procedure.