TMH14XMT1 Estate Microwave - Parts

Handle only. Screws must be ordered separately.

This is an authentic manufactured drive coupling for a microwave. It fits on the motor shaft to hold and rotate the glass turntable tray while the appliance is running. This part has a D-shaped insert for the motor shaft, and measures approximately 3 inches in diameter. You may need to replace this part if the microwave tray will not turn...Read more. No tools are required for this repair. It is recommended to check the support ring before ordering the drive coupling in case the wheels are broken. This part is also known as a turntable coupling or microwave turntable support.

Screws NOT included.

This microwave oven vent charcoal filter removes odors while cooking. If your charcoal filter is old or is malfunctioning, you may want to replace it. This part is metallic and black in color. It measures about 7 inches wide by 6-1/2 inches deep. This product is sold individually. This filter is an OEM part, sourced directly from the manu...Read morefacturer. Many of our customers have rated this repair as easy. To complete this repair, simply remove the old filter and replace it with the new one. Be sure to remove any debris you may encounter when you remove the old filter.

This damper is an authentic OEM replacement assembly used in microwave/range hood combos. It includes the damper door and frame. It is designed to direct the flow of air through the vent duct, and the release of steam and heat from the appliance during cooking. Over time, the damper door and frame can wear down or become obstructed by foo...Read mored particles and debris. A faulty damper assembly will result in poor ventilation, uneven cooking, and excessive moisture buildup which can damage internal components in the appliance. Disconnect any wires or connectors attached to the faulty damper assembly and remove it from the appliance. Position the new damper assembly and reconnect the wires/connectors before securing it with the appropriate fasteners.

Screws are NOT included.

This individual microwave mounting bracket attaches the vent grill to the cabinet. Most times, these are sold with the vent grill assembly.

This microwave door interlock switch is a critical safety component designed to prevent the appliance from operating when the door is open. It functions by detecting the door’s position—open or closed—and relaying this information to the microwave’s electronic control system. This ensures the unit only activates when the door is securely ...Read morelatched. Commonly used in microwave models experiencing issues such as failure to start or lack of heating, the switch plays a vital role in maintaining safe operation. Installation involves accessing the internal door latch mechanism and replacing the switch, which typically requires basic tools and careful handling to avoid damage to surrounding components. The switch is compact and designed to fit seamlessly within the microwave’s door assembly.

This light socket is designed for use in your microwave. The function of this part is to connect your light bulb to the power source, so the light works during operation. If you notice your light is not functioning, you may need to replace the light socket. Be sure to test your light bulb to see if that is the issue before replacing the l...Read moreight socket. This light socket is approximately 2 inches in width, and 1 inch in height. It is made of black plastic, and the appropriate light bulb will simply screw in to the housing. The part is sold individually.

Sold individually. For white and almond models.

This part is used to mount your microwave to the wall.

Sold individually.