EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

TGS325VB2 Estate Range - Instructions

All Instructions for the TGS325VB2
76 - 90 of 178

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven handle broke
2 of 2 people found this instruction helpful.
  • Jim from CAMDENTON, MO
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
new handle arrived black for white oven - screws did NOT fit new handle- glass came off the door when removing old handle
Was this helpful?
Thank you for voting!
Stove would not light due to faulty electronic ignighter
2 of 2 people found this instruction helpful.
  • Victor from SAINT PETERS, MO
  • Really Easy
  • 30 - 60 mins
Very easy repair, simply remove old ignighter and install new one. Take pictures if you need help remembering where everything goes.
Was this helpful?
Thank you for voting!
Oven would not maintain Heating
2 of 2 people found this instruction helpful.
  • Cheryl from WEST JORDAN, UT
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Following details from the installation video, after removing the main gas line and the two output lines I removed the four screws that removed the valve but found it was easier to remove and install the new one if I first removed the oven burner(it made for lining up the valve nozzle to the burner easier) from the inside, 3 wires attach on the side towards the stove taking one wire from the old valve and putting it on the new valve in the same place. Everything went back together just fine, I did have some problem with tightening one of the two gas lines for the output and found I just had to keep tightening it a little until there were no bubbles appearing when I applied soapy water to the connections, other than that it was very straight forward.
Was this helpful?
Thank you for voting!
Didn’t work
2 of 3 people found this instruction helpful.
  • James E. from WAYNE, MI
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Took out old one but electric hook up fell in the hole had to fish it out also dropped a screw in the hole could’ve find it used a different one
Was this helpful?
Thank you for voting!
last oven bottom was ruined by melted and burnt plastic
2 of 3 people found this instruction helpful.
  • Dennis from Missouri Valley, IA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
took out old oven bottom by removing 2 screws, placed the new oven bottom in place put the screws back in and was done.
Was this helpful?
Thank you for voting!
the oven temperature was not working right. I installed a new oven sensor. Works get now
3 of 6 people found this instruction helpful.
  • Rosalind from APOLLO, PA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Watch the video...
Was this helpful?
Thank you for voting!
Followup Repair to Install Door Trim
2 of 3 people found this instruction helpful.
  • John from Madison, WI
  • Difficult
  • 30 - 60 mins
  • Screw drivers
I had to unscrew the handle from the door as well as take out the front glass, put the trim in place (Thank God for the bottom placement nipples on each trimpiece), hold everything together after aligning all the pieces in place while I screwed the handle back on. The reason I was replacing the trim in the first place was that it is fragi le plastic that had broken on both sides when I replaced one inner glass piece that had broken.
Was this helpful?
Thank you for voting!
Control knob broken
2 of 3 people found this instruction helpful.
  • Ann from BROOKLYN, NY
  • Very Easy
  • Less than 15 mins
Slipped the old one off and slipped the new one on. Could not have been simplier.
Was this helpful?
Thank you for voting!
temp level uneven
2 of 3 people found this instruction helpful.
  • Paul from HARMONY, MN
  • Very Easy
  • 15 - 30 mins
after watching the video, installed the temp sensor. Super easy
Was this helpful?
Thank you for voting!
Gas oven interment lighting. Pan was cracked and out of shape.
2 of 3 people found this instruction helpful.
  • Teddy from PRAIRIEVILLE, LA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Loosen top two rear screws from the top pan. Remove top pan
Remove 2 front screws from bottom pan. Remove bottom pan. Reverse order.
Replace both pans.
Was this helpful?
Thank you for voting!
Door handle of stove's oven broke. Had problem finding handle until I contacted Select Parts.
1 person found this instruction helpful.
  • Martha from EDISON, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The repair went well. Only took a few minutes. Oven is 21 years old and still working. I figured why throw away if still working. Thank you Select Parts for coming to my rescue. Will keep you in mind.
Was this helpful?
Thank you for voting!
Rust on oven door lower trim.
1 person found this instruction helpful.
  • Daniel from ONTARIO, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Do not remove the oven door. (Not necessary.)
Remove the lower storage drawer.
While laying on the floor, remove 5 screws on bottom edge of door, two on each end, one in the middle. Middle screw is slightly different than other 4.
Caution: When removing the lower trim, the front glass may slip down. Be prepared to catch it. The side trim pieces may also slip out.
It helps to have a second pair of hands here. If needed: Slide the front glass back into place. Slide the side trim pieces back into place.
Position new lower trim piece, align holes. Start with the center screw, then the end screws. Leave all screws "loose" until all 5 are threaded, then tighten.
NOT recommended to caulk trim to prevent future rust. The caulk will act like glue on the front glass.
Was this helpful?
Thank you for voting!
Broken slide segment on drawer glide
1 person found this instruction helpful.
  • Linda from WATERTOWN, WI
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Luckily, I bought 2 glides right away, as the 2nd one broke while I repaired the 1st one. It was a straight forward screw in the parts using a Phillips screwdriver.
Was this helpful?
Thank you for voting!
oven light kept burning out instantly
1 person found this instruction helpful.
  • David from ENID, OK
  • Easy
  • 15 - 30 mins
  • Screw drivers
Replaced the oven light with a new one but it burnt out as soon as I turned it on. Therefore I decided a new socket may help.

My whirlpool apparently has the old style socket which is pictured in partselect part #PS12584564. The old style socket has to two metal arms that retain it against the metal reflector.

The part that will come (#PS12584564) however is the new style that whirlpool has changed to, apparently. It is not as pictured. The socket and the reflector have different retention devices.

I used screw drivers to bend the two metal arms away to release the socket. Then I had to use allen wrenches to bend the reflector's retention tabs away.

Once I had the old socket, reflector, and lens replaced I just followed the video on partselect for part #PS12584564
Was this helpful?
Thank you for voting!
broken rear drawer glides
1 person found this instruction helpful.
  • Jeff from Manhattan, KS
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
just replaced the broken glides with the new ones.
Was this helpful?
Thank you for voting!
All Instructions for the TGS325VB2
76 - 90 of 178