EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

TFX24PFXABB General Electric Refrigerator - Instructions

All Instructions for the TFX24PFXABB
61 - 75 of 307

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No water through door dispenser
2 of 3 people found this instruction helpful.
  • Roger from Colleyville, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced flapper valve per website instructions. GE factory technician took two weeks to get here, charged over $100 for the call and told us we needed a new refrigerator door at a cost of over $500 to fix the problem. We sent him packing. After visiting the PartSelect website, the $5.88 PartSelect flapper valve fixed the problem. Ama zing.
Was this helpful?
Thank you for voting!
making rust in ice
2 of 3 people found this instruction helpful.
  • Cindy from Yorba Linda, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This is the easiest thing in the world - thanks for sharing other's installation - it took 5 mins - works perfect & we have clean ice - 4 easy screws to remove - anyone can do it!
Was this helpful?
Thank you for voting!
Blade on auger became stripped
2 of 3 people found this instruction helpful.
  • Raymond from Niverville, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Ordered at PartSelect and received the auger and blade within days. Printed the parts diagram and proceeded to take the auger apart the time it took would have been much less but I seized the opportunity to do a deep cleaning of the old parts before replacing them....The part diagram was the key to simplicity and the fast shipping was aw esome. Thanks I'll be back....
Was this helpful?
Thank you for voting!
The freezer light shield was broken.
2 of 3 people found this instruction helpful.
  • Fred from Union, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the ice maker,removed the broken piece of the old light shield,screwed the new light shield in place,and replaced the ice maker.It took all of 5 minutes.
Was this helpful?
Thank you for voting!
Light Shield Broke Off
2 of 3 people found this instruction helpful.
  • Travis from Hillsboro, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light shield is only held in with a single screw, so it was the simplest install ever - unscrew the old light shield (in my case, the remaining piece of the light shield), put the new shield in place, and screw it down. Doesn't get any easier than that.
Was this helpful?
Thank you for voting!
ice maker was rusty
2 of 3 people found this instruction helpful.
  • bryan from miamif, FL
  • Really Easy
  • Less than 15 mins
i ordered this ice maker on sunday night and paid for the cheapest shipping. it got here monday morning and i couldnt believe it. super fast shipping!! works great
Was this helpful?
Thank you for voting!
Door closing cam split in two and door would not automatically close anymore.
1 person found this instruction helpful.
  • John from Salinas, CA
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
This one is a no brainer… One Phillips screw on top to pull top door hinge trim. Two nuts and the top hinge is free. Then pull the door… it helps if you unload all the crap in the door bins. Remove the remnants of the door cam and that leaves a pop rivet. Put some vise grips on the head and use a hacksaw to remove the lower part of th e rivet. Then pop-rivet the new door cam in place. If you don’t own a pop-rivet tool, I guess you could use a 10/32” screw and nylock. Plop the door back on and you’re done. Took all of about 15 minutes.
Was this helpful?
Thank you for voting!
Bulb burned out.
3 of 7 people found this instruction helpful.
  • Jimmie from Surprise, AZ
  • Really Easy
  • Less than 15 mins
Screwed new bulb in socket
Was this helpful?
Thank you for voting!
drawer facing cracked
3 of 7 people found this instruction helpful.
  • Christine from Delray Beach, FL
  • Really Easy
  • Less than 15 mins
ordered drawer face - perfect part- snapped right in. done. order came within 10 days.
will order again if needed.
Was this helpful?
Thank you for voting!
Plastic guide in rear of bucket broke it guides auger when dispensing ice
1 person found this instruction helpful.
  • Robert from FIFE LAKE, MI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I simply removed 6 screws that held bucket to face and pit on new bucket and put it back in freezer works great
Was this helpful?
Thank you for voting!
drum light burned out
1 person found this instruction helpful.
  • Stephanie from DENVER, CO
  • Really Easy
  • Less than 15 mins
removed the bulb from the package unscrewed the old bulb & screwed in the new bulb.
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 people found this instruction helpful.
  • Catherine from SEATTLE, WA
  • Very Easy
  • Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap. ... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Was this helpful?
Thank you for voting!
My ice container and Ice chute were freezing up and getting blocked, and my filtered water line was also freezing
1 person found this instruction helpful.
  • Joe from BRICK, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I just followed the instructions on the video and it was exactly as they said......no surprises.
Was this helpful?
Thank you for voting!
GE vegetable drawer broken.
1 person found this instruction helpful.
  • Philip M. from SIMPSONVILLE, SC
  • Very Easy
  • Less than 15 mins
Concerned about removing and attaching front panel to broken drawer. Rep. said wasn't sure but most just snapped together. Rep. was correct. No tools required.
Was this helpful?
Thank you for voting!
The light bulb in my freezer door burned out.
1 person found this instruction helpful.
  • Peter from HAZELHURST, WI
  • Very Easy
  • Less than 15 mins
Remove the burned out bulb and install the new light bulb.
Was this helpful?
Thank you for voting!
All Instructions for the TFX24PFXABB
61 - 75 of 307