My Orders
- Home
- TF8600XTP2
- Instructions
TF8600XTP2 Whirlpool Trash Compactor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken plastic drive gear
-
Charles from Goshen, KY
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Very simple, changed the gear, adjusted the drive and tested. Very straight forward.
Was this helpful?
Thank you for voting!
ram uneven and drawer would not close
-
wayne from angelus oaks, CA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
refloored the floor and so the unit would not come out. had to cut tile, broke edge off of formica counter but once the unit was out a piece of cake. 6 self tapping screws removed , right on the top, two screws holding the cover for the power nuts, replaced broken nut, leveled ram, replaced nuts and ready to slide back in. After thought,
... Read more
I had one nut on hand from a few years earlier. I ordered two new nuts and now i am going to pull the unit again and replace both nuts. thought being a longer period before having to do this again. The unit was put in in 1981 and used continuously.
Read less
Was this helpful?
Thank you for voting!
Large plastic gear cracked in half. Compactor was stuck in the compact postition
-
Mike from Campbell, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
replaced the large gear and put it back together.
Was this helpful?
Thank you for voting!
Broken drive gears
-
THOMAS from DENNISPORT, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Wrench set
Took out old gears replaced with new very easy with your dirictions.
Was this helpful?
Thank you for voting!