TEDS840JQ2 Estate Dryer Parts & Repair Help | PartSelect
Models > TEDS840JQ2

Sections of the TEDS840JQ2

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(239)
PartSelect #:PS11741460
Manufacturer #:WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 in...
$10.01
In Stock
Order within the next 10 hrs and your part ships today!
(204)
PartSelect #:PS346995
Manufacturer #:341241
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the moto...
$15.88
In Stock
Order within the next 10 hrs and your part ships today!
(95)
PartSelect #:PS334313
Manufacturer #:279838
The heating element is strung with a coiled wire that is made out of a nickel and chrome alloy. The coiled wire on the heating element receives and resists a controlled electric cu...
$61.46
In Stock
Order within the next 10 hrs and your part ships today!
(60)
PartSelect #:PS11741405
Manufacturer #:WP3387134
A cycling thermostat is in tune with the temperature of your dryer and regulates it in order to maintain a certain temperature. This thermostat reaches a temperature of 155 degrees...
$22.88
In Stock
Order within the next 10 hrs and your part ships today!
(199)
PartSelect #:PS11741701
Manufacturer #:WP3406107
A door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open. This part may need to be replaced if you find that the dryer is not...
$22.79
In Stock
Order within the next 10 hrs and your part ships today!
(41)
PartSelect #:PS334299
Manufacturer #:279816
The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one...
$40.16
In Stock
Order within the next 10 hrs and your part ships today!
(64)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$5.04
In Stock
Order within the next 10 hrs and your part ships today!
(97)
PartSelect #:PS373087
Manufacturer #:4392065
This maintenance kit or dry repair kit is used for dryers. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip. If your dryer is ma...
$42.05
In Stock
Order within the next 10 hrs and your part ships today!
(48)
PartSelect #:PS347627
Manufacturer #:349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining was...
$21.24
In Stock
Order within the next 10 hrs and your part ships today!
(18)
PartSelect #:PS11742185
Manufacturer #:WP3977767
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit,...
$16.85
In Stock
Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: ANTHONY from CHESHIRE, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2417 of 2711 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

Dryer motor runs, but no heat

  • Customer: Gadi from Irvine, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 2066 of 2223 people found this instruction helpful
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.

To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.

You can check the heating element with an ohm-meter or v... read more

Dryer tub belt broke

  • Customer: Ray from Denton, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 997 of 1059 people found this instruction helpful
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of the dryer top with a small flat head screw driver. The top of the dryer will fold back out of the way. At this point I removed the two 1/4 inch screws that are ... read more