TCX230 Shindaiwa Trimmer - Parts

This authentic part is designed for Shindaiwa handheld trimmers. It is supplied directly from the original equipment manufacturer. The button is pressed on the ground to extend the cutting line from the spool. It is an identical replacement for a damaged or a missing component that was installed on a new unit. To ensure the correct instal...Read morelation of the new part, refer to the appropriate diagrams of your model. One durable plastic button is included. To perform this repair no tools would be needed, remove the old and secure the new one.

This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch. This part is installed using a screwdriver, and is rated as Easy to install by our customers. This part secures the plastic primer bulb to the air purge body assembly, and must be replaced if damaged or bent.

This is an authentic Shindaiwa replacement part that has been sourced from the original manufacturer to be used with trimmers. The plastic spool is used to store trimmer line within the cutting head assembly. This item is sold as an individual replacement part, please note tools may not be needed to install the spool.

59" long and is 1/4 of an inch diameter.

The spring goes between the spool and the housing and is available individually. If this part becomes broken or bent it will need to be replaced. During installation, a wrench may be needed to replace the metal spring. This is an authentic replacement part sourced from the original manufacturer for use with Shindaiwa brushcutters and trimmers.

This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is made out of flexible plastic and it is sold individually. Please note, clips, joints and the fuel filter are all sold separately.

This item has been sourced from the original manufacturer and is intended to be used with trimmers and brushcutters from Shindaiwa. The durable plastic cap is used to support the spool and bump. This item aligns with the tabs on the housing and secures the spool within the housing. This item is available as an individual replacement part.

This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.

This is an original Shindaiwa replacement part manufactured for use with outdoor power equipment. The joint is used to connect fuel lines and is commonly used to connect the return fuel line to the fuel tank grommet. This joint is sold individually, please seem model diagram for associative parts.

This is a genuine Shindaiwa replacement part manufactured for outdoor power equipment. This kit is OEM, not an aftermarket imitation. The kit includes the diaphram, and gaskets between the air purge body, and carburetor body. It is recommended to replace the gaskets when reassembling the carburetor after a repair, the kit is sold individually.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.