- Home
- TC800SPDB0
- Instructions
TC800SPDB0 Whirlpool Trash Compactor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drawer handle was broke.
-
Peter from Fairmont, WV
- Easy
- Less than 15 mins
-
Nutdriver
The repair was simple and expensive for a little piece of plastic that was the wrong color and only color available. We have a white trash compactor and had to order a black one. The hardest and most time consuming part of the repair was painting the handle. In order to paint a Black Plastic handle white we had to use special primer an
... Read more
d special paint. Before using the primer, we had to wash the plastic handle with paint thinner, then rinse and let dry completely. Other than the cost and the aggravation, it was fine. And it was less than buying a new one. : )
Read less
Was this helpful?
Thank you for voting!
compactor will not stop when compaction complete on top cycle
-
BRUCE from CASPER, WY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
take 2 screws out on top cover with key switch. remove two screw holding directional switch. remove wires, one at a time, and place on the new switch. put new switch in place with two screws. put front cover on with two screws and test. works like a charm.
Was this helpful?
Thank you for voting!