My Orders
- Home
- TBT16JAXLRAD
- Instructions
TBT16JAXLRAD General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
sweating
2 of 9 people
found this instruction helpful.
-
carl from zephyrhills, FL
- Really Easy
- Less than 15 mins
i found that the door was to low was the problem shimmed the hinge on the bottom brought the door up so the gasket was ok so isent the new gasket back to you never attempted to change so i dont have any thing to tell you about instalation difficulty carl phillips
Was this helpful?
Thank you for voting!
broken crisper drawer support
-
Richard from Owls Head, ME
- Really Easy
- Less than 15 mins
quick and simple--removed the old one and slid new part in on same support pins.I had the new part via UPS LESS THAN 24 HRS.FROM THE TIME I PLACED THE ORDER! THANKS, SOMEONE IS REALLY ON THE BALL.
Was this helpful?
Thank you for voting!
Front Door Shelf Retainer Bar Broke
-
Aaron from Bellevue, NE
- Really Easy
- Less than 15 mins
Attached the retainer bar to the door clips and attached to refrigerator.
Was this helpful?
Thank you for voting!
The bottom part of fidge was warm with water droplets on the its ceiling.
-
Charles R from Renton, WA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed Ice shelf,
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart b ... Read more rackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart b ... Read more rackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Read less
Was this helpful?
Thank you for voting!