ST40 - Parts

The friction ring attaches to the body. This is an OEM part sourced directly from the manufacturer and used in Shimano spinning reels. This item is made of rubber and is sold individually. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.

This authentic replacement part is designed for use with Shimano fishing reels. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time components will wear out and may...Read more begin to fail eventually requiring a replacement to ensure best performance. Keep in mind this high-quality bearing is made of durable metal and is sold individually.

This part is authentic OEM for Shimano reels. Ball bearings are made to hold metal parts and facilitate rotational movement. They stabilize direction and angle of shafts and other moving parts. As high wear components, it is not unusual to replace bearings often. This item sold individually.

This is a Genuine OEM replacement part used on some Shimano Fishing Reels. This part is made out of Metal and it is Sold Individually. Sometimes if it sounds like the reel is grinding when you are retrieving line, general assumption is to think there is a major problem with the gears in reel. In reality usually the reel is fine and just the bearing is compromised.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Shimano fishing reels. The purpose of this washer is to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable material and is sold individually.

This authentic part is supplied by the original equipment manufacturer for use with Shimano fishing reels. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individu...Read moreal item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this anti-reverse cam spring.

This hardware is an authentic OEM part which is designed for use with Shimano fishing reels. It helps to secure the bearing. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality E lock is made of durable metal and is sold individually. Make sure to check the a...Read moreppropriate diagrams of your model for the exact location and the correct installation of this component. You may need pliers to remove and replace it.

This is a genuine OEM sourced component which is specially designed for use with Shimano fishing reels. It is an identical replacement hardware that was installed on a new unit. The pin helps to control the drag of the reel, please make sure to refer to the appropriate diagrams of your model for the correct location and application of thi...Read mores item. Keep in mind this high-quality click pin is made of durable plastic and is sold individually.

This is a Genuine Manufacturer Sourced replacement part used on Shimano Spinning Reels. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces...Read more friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver. First you would need to disconnect the Reel Handle. Then remove the Side Cover by loosening the Screws that hold it. You should be able to remove the old Bearing. Install new Bearing and Reassemble the Reel

This part is supplied directly from the original equipment manufacturer. The metal ball bearing is compatible with many spinning reels. This component is fitted onto the drive gear in the body, and works to reduce friction in the fishing reel. A screwdriver is needed in making the repair. This part is sold individually.

This replacement ball bearing is an authentic Shimano component which is designed for use with fishing reels. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may ...Read moreinclude squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. A screwdriver will be needed to perform this repair. Make sure to refer to the appropriate diagram for your model to ensure the proper replacement procedure.