SP415 (198697L3) Shindaiwa Sprayer - Parts

The Spray Wand Assembly is part of a kit which includes the extension wand, trigger handle, and nozzle. Installation is rated as "easy". This part is used to spray liquid from the wand and attaches to the dip tube assembly. If broken it may not spray properly, and should be replaced.

The Dip Tube Assembly is used to carry liquid from the tank to the spray wand. It's constructed of rubber and plastic and comes in black. This is an OEM part, and installation is rated as "Easy" and requires pliers. If the part is unable to dispense water properly or if it leaks, you may need to replace it. The part attaches onto the spra...Read morey wand assembly. Refer to your make, model and diagrams to ensure this is the correct part for you.

This Buckle set is made of black plastic, and is used to suppport a backpack. Its rated as "Easy" to install. If broken, this part should be replaced.

The Adjustable Cone Nozzle adjusts the spray to various widths and attaches to a nozzle filter, on the end of the spray wand/tube. Installation is rated as "easy" and requires pliers. If broken, it will no longer be able to adjust the width of spray and should be replaced.

This trigger is an OEM part direct from Shindaiwa. The metal and plastic trigger is made for use with several handheld and backpack sprayers. Fastened to the wand assembly, this component allows the operator to control the distribution of fertilizers, herbicides, pesticides and other substances. No tools are needed for the repair. This it...Read moreem is sold individually. Although the trigger is sold individually, it is also included in the spray wand assembly (568774).

The Trigger Valve Assembly houses the trigger valve and controls the on/off flow of liquid. Installation is rated as easy and requires pliers. It attaches to the elbow and spray tube. If broken you will not be able to control the flow of liquid to be dispensed, and the part should be replaced.

This part is priced individually. The nitrilic diaphragm valve fits between the cylinder and the o-ring. It is made of a thin rubber and will need to be replaced if it breaks. A screwdriver may be needed when replacing the diaphragm. This is a genuine replacement part sourced from the original manufacturer for use with Shindaiwa sprayers.

The piston cup is made of rubber and is part of the chamber assembly. This item is available as an individual replacement part. It is a Shindaiwa replacement part directly sourced from the manufacturer for use in paint sprayers. A set of pliers may be required to replace this item if it becomes broken.

This is an OEM part sourced directly from the manufacturer. The O-ring is found in a Shindaiwa backpack sprayer. This part is made of flexible plastic, and is used to help cushion and seal the connection between the chamber covers. Please be aware that there are different O-rings used in the machine. Refer to the parts diagram to be s...Read moreure of ordering the correct part. You may require pliers when replacing this item. This part is sold individually.

This is an authentic Shindaiwa replacement part manufactured for use with sprayers. The special elbow is commonly used to connect the nozzle assembly to the spray tube. This elbow is available as an individual replacement part, please see model diagram for associative parts.