SH1000FD Shimano Spinning Reels - Parts

This part is made of metal and is available individually. The spool support attaches to the main shaft. A screwdriver may be helpful when replacing this item. It will need to be replaced if it becomes broken. This is an OEM Shimano part directly sourced from the manufacturer for use reels.

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This is an authentic Shimano replacement part manufactured for use with spinning reels. The special screw is compatible with several models of reels and is commonly use to secure the rear protector to the body of the reel. This screw is available as an individual replacement part, please see model diagram for associative parts.

This part is sourced from the original equipment manufacturer. It is specially designed for use with Shimano fishing reels. The click spring applies tension on the clicker. It goes between the bail arm click and the main shaft. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make su...Read morere to refer to the diagrams for your model for the correct location and application of this part. This high-quality click spring is made of durable metal and is sold individually.

This is an authentic OEM sourced replacement part designed for use with Shimano fishing reels. This is a special screw which is used to secure the bail arm, please refer to the appropriate diagram of your model for correct location and use of this hardware. This screw is made of high-quality metal and it is sold individually.

This is an OEM Shimano part directly sourced from the manufacturer for use in reels. The screw attaches to the rotor and is made out of metal. A phillips screwdriver will be required to replace this part if it becomes broken or stripped. This item is available as an individual replacement part.

This is an OEM Bail Spring Guide sourced directly from the manufacturer, and is used to support the Bail Spring on a spinning reel. This metallic part is sold individually. Please note the bail spring and seat are sold separately. A Philips Head screw driver is required to access the bail spring assembly.

This bail spring is an OEM direct from Shimano. The metal spring is compatible with many spinning reels. This item is fitted between the bail spring seat and the spring guide (a) support. The bail spring is sold individually. A screwdriver and pliers are often required for the installation process.