My Orders
- Home
- SCS3614GT2
- Instructions
SCS3614GT2 Whirlpool Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner grates crumbling from use and age.
15 of 19 people
found this instruction helpful.
-
Fredrick from Rockford, MI
- Really Easy
- Less than 15 mins
Replaced the grates. Very pleased. Great service, correct parts, happy customer.
Was this helpful?
Thank you for voting!
burner grates were very scaley(rough)
4 of 8 people
found this instruction helpful.
-
joseph from YONKERS, NY
- Very Easy
- Less than 15 mins
exchanged old with new
Was this helpful?
Thank you for voting!
Peeling paint grate
2 of 2 people
found this instruction helpful.
-
Patricia from OLYMPIA, WA
- Really Easy
- 15 - 30 mins
Remove old grate place new grate on gas stove top
Was this helpful?
Thank you for voting!
Symptom: No clicking spark to any of the burners.
1 person
found this instruction helpful.
-
David from JACKSONVILLE, FL
- Easy
- 30 - 60 mins
-
Screw drivers
Based on symptom, knew either switches or spark module. Checked continuity to each switch. Knew if only one faulty, entire harness must be replaced. Checked out good. Spark module isolated so replaced it.
Was this helpful?
Thank you for voting!
No spark to any of the burners
1 person
found this instruction helpful.
-
William from DELANO, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
I slid the range out about 8 inches from the wall, and having unplugged the range and looked at the diagram from the Parts Select site, I used a mirror and screwdriver to remove the screws holding the small rear cover. From there I removed the one screw holding the spark module and that way I was able to hold the old and new one side by
... Read more
side to move the wires. Reversed the process, easy peasy.
Read less
Was this helpful?
Thank you for voting!
Burner Grate coating was damaged
-
Joseph W from Anaheim, CA
- Really Easy
- Less than 15 mins
Remove old grate and replace with new one.
Was this helpful?
Thank you for voting!
Replaced a stove burner grate
-
Robert from Oakton, VA
- Really Easy
- Less than 15 mins
No tools necessary. Shipment was extremely quick; I was very pleased.
Was this helpful?
Thank you for voting!
Worn out spring assembly in valve.
-
Stephen from Ladera Ranch, CA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set, Wrench set
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in or
... Read more
der. Fairly straight forward.
Read less
Was this helpful?
Thank you for voting!