SCG456RW Thermador Cooktop - Parts

This is a cooktop burner igniter that is compatible with various makes and models of cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within your cooktop or stovetop and is made of a combination of metal and ceramic. If the ceramic insulator is cracked or broken in any way upon inspe...Read morection, this igniter will need to be replaced immediately. Before replacing this igniter, make sure your cooktop or range is unplugged from any sources of electricity and that the gas supply is shut off.

This spacer kit, also known as a grate foot kit, is a set of four padded feet designed to protect your burner grates and prevent scratches on the cooktop. Typically located at the bottom corners of the grates, these feet create a protective layer between the grates and the cooktop surface. You can tell if a grate foot is worn out by check...Read moreing for signs of damage. Look for any missing pieces or significant flattening of each foot. Your grates may also wobble or not sit level on the cooktop. If the grate feet are not replaced when they are worn out, cooking can become difficult. Unsteady grates may lead to spills, while direct contact with the cooktop can cause scratches, damage, or discoloration. To replace the grate feet, start by unplugging the appliance and shutting it off at the circuit breaker. You will need a putty knife and high-temperature adhesive. Lift the burner grate and turn it over. Use the putty knife to pry out the worn-out foot and clean its slot as thoroughly as possible. Attach the new foot into the slot using adhesive. Remember that each genuine OEM kit contains four feet, so make sure to confirm the required quantity for your cooktop before purchasing.

This nut is designed for use with different makes and models of ranges and cooktops and is a genuine OEM part. This nut is 1mm thick and is 22-threads-per-inch, and is made of high-quality, durable stainless steel. This nut is used to primarily seal and secure the cooktop to your range.

This OEM-verified venturi tube, found in your range, blends gas and air to create the proper fuel-air mixture for combustion. It is alternatively known as a gas tube connector or surface burner tube. Typically located within the burner assembly, this tube connects the gas supply line to the burner. Signs of a damaged venturi tube include ...Read moregas leaks around the burner and an inconsistent or flickering flame. Ignoring the replacement of a broken tube can lead to inefficient combustion and poor burner performance. To replace the venturi tube, begin by removing any components that cover the burner assembly. For guidance on accessing the venturi tube, consult your user manual. Using a wrench or pliers, disconnect the tube from its connections. Please take note that this replacement part is sold separately.

This is a fixing kit for a gas range or cooktop, it is also known as a spark module. It is a six-point gas re-igniter with flame rectification. A spark module is used to create the spark that ignites the gas for the burners, in this case this spark module re-light the cooktop burner flame if it goes out during use. If your burners will no...Read moret light, or will not re-light and the spark ignition system is failing you may need to replace the spark module in your range or cooktop. Before you replace this part make sure you have shut off the gas supply, and unplugged the appliance.

Sold individually. This burner cap is for cooktops. Burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.

This burner cap is for cooktops. Burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.