SA5000FE Shimano Spinning Reels - Parts

This is a genuine item that is supplied by the original equipment manufacturer for use with Shimano fishing reels. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. K...Read moreeep in mind this high-quality part is made of durable metal and is sold individually.

This item is available as an individual replacement part. The ball bearing goes between the drive gear and the body. A screwdriver may be helpful when replacing this part. This part is made out of metal and will need to be replaced if it breaks or wears down. It is an OEM part sourced directly from the manufacturer and used in Shimano reels.

This authentic manufacturer-sourced part is specially made for use with Shimano fishing reels. Ball bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time the...Read more components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagram of your model for the exact location and application of this component.

This authentic part is supplied by the original equipment manufacturer for use with Shimano fishing reels. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individu...Read moreal item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this anti-reverse cam spring.

This ball bearing is an authentic OEM replacement part provided by the manufacturer. It is designed for use with various models of Shimano spinning reels. This small ball bearing reduces friction between adjacent parts of the reel. It is made of metal, and it should be replaced if it is lost. It is recommended to properly lubricate and clean this part regularly for optimum performance.

This is an authentic Shimano replacement part. The washer is designed by the manufacturer for use in fishing reels. This part is made of metal, and is generally used in attaching the handle knob and allowing to spin easily on the handle. Please be aware that there are different washers used in the reel. Refer to the parts diagram to b...Read moree sure of ordering the correct part. You may require a screwdriver when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This is a Genuine Manufacturer Sourced replacement part used on Shimano Spinning Reels. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces...Read more friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver. First you would need to disconnect the Reel Handle. Then remove the Side Cover by loosening the Screws that hold it. You should be able to remove the old Bearing. Install new Bearing and Reassemble the Reel

This is made out of plastic and is available as an individual replacement part. The line roller bushing fits between the line roller and the ball bearing. If this part becomes broken or lost it will need to be replaced and may require a screwdriver during the installation. This is an OEM part sourced directly from the manufacturer and used in spinning reels made by Shimano.

This is an authentic replacement part sourced directly from the manufacturer. The drag washers retainer is found in Shimano spinning reels. This part is made of metal, and is used to hold the washers in place between the drag knob and spool. You may require a screwdriver when replacing this part. This item is sold individually.

This replacement part is specially designed for Shimano fishing reels. It is supplied directly from the original equipment manufacturer. The drag washer is an important component of the drag mechanism which applies tension on the line. If the fish pulls on the line hard enough, the reel will rotate backward, letting the line out and preve...Read morenting it from breaking. This part is designed to wear out with time and will eventually need to be replaced. Check the diagrams for your model to ensure the exact location and the correct installation of this item. You will need a screwdriver to take the reel apart when performing this repair. Note, one durable drag washer is included.