My Orders
RYE3652E Whirlpool Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
two large burners wouldn't heat or would smoke even after cleaning
5 of 7 people
found this instruction helpful.
-
Lois from KNOXVILLE, TN
- Really Easy
- Less than 15 mins
i really wanted a new stove, but budget wouldn't permit; so just had to insert the new ones and they work great with level cooking.
Was this helpful?
Thank you for voting!
burner would not stay heated had to wiggle the burner to make heat
3 of 4 people
found this instruction helpful.
-
Marjorie from Swanton, MD
- Really Easy
- Less than 15 mins
Replaced with the new burner works like new. Thanks a bunch!
Was this helpful?
Thank you for voting!
Burners weren't heating
3 of 4 people
found this instruction helpful.
-
james from killingworth, CT
- Really Easy
- Less than 15 mins
Unplugged old burner elements. Popped in new burners. Turned on the burners to test.
Was this helpful?
Thank you for voting!
Electric Stove Burner was working unreliably
3 of 5 people
found this instruction helpful.
-
Jacqueline from Austin, TX
- Really Easy
- Less than 15 mins
pulled out the old burner, plugged in the new burner. Turned on the power and it heated up very quickly.
Was this helpful?
Thank you for voting!
The larger burners would stop working while in use.
2 of 2 people
found this instruction helpful.
-
Lisa from PORT JEFF STA, NY
- Very Easy
- Less than 15 mins
The removal of the old burner and installation of the new burners was easy. Just lift the opposite side that rests on the rim and pull burner out. New burner then gets inserted and the opposite side goes right into rim. It took all of 30 seconds to replace both burners. I wish I had replaced these when they first started to go!!
Was this helpful?
Thank you for voting!
Range oven door switch need replaced
1 person
found this instruction helpful.
-
Ruth from Gastonia, NC
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
I raised the top of my Whirlpool Continuous Cleaning Canning Oven, then had to unscrew 3 screws and a lock nut, then raise top about 4 inches, so I could put my hand inside to unplug the wires to the switch, and push it through the hole in front, of oven. Then put the new switch through hole and plug in new switch. Then screw down top;
... Read more
and close lid. Part #866294
Read less
Was this helpful?
Thank you for voting!
Element did not heat
1 person
found this instruction helpful.
-
Mary from CHARLESTOWN, IN
- Very Easy
- Less than 15 mins
Pulled out element, plugged in new element. About 5 seconds.
Was this helpful?
Thank you for voting!
Oven Wouldn't Heat
2 of 4 people
found this instruction helpful.
-
DAVID from PETALUMA, CA
- Really Easy
- Less than 15 mins
Of course, power off first, then I removed the old one and inserted the new one, make sure everything in right place, then turn on power, simple as 1-2-3.
Was this helpful?
Thank you for voting!
center piece of the heating element broke off
1 of 2 people
found this instruction helpful.
-
Elaine from Atascadero, CA
- Really Easy
- Less than 15 mins
so easy, just ordered the part, the part came and inserted the element into the stovetop
Was this helpful?
Thank you for voting!
stove top burner would not heat
1 of 2 people
found this instruction helpful.
-
Marjorie from Indianapolis, IN
- Really Easy
- Less than 15 mins
new element plugged into burner connection- an easy fix
Was this helpful?
Thank you for voting!
element shorted out
2 of 6 people
found this instruction helpful.
-
David from Pittsburgh, PA
- Really Easy
- Less than 15 mins
Replaced the element. The part came the next day which was great. Good customer service!
Was this helpful?
Thank you for voting!
burner stop heating
0 of 1 people
found this instruction helpful.
-
Pastor Shelly from Sumter, SC
- Really Easy
- Less than 15 mins
pulled out old burner and pushed in new burner.
No tools needed.
No tools needed.
Was this helpful?
Thank you for voting!
needed to replace one burner
1 of 4 people
found this instruction helpful.
-
Donna from Carver, MA
- Really Easy
- Less than 15 mins
the part arrived in two days. Just had to remove the old one and pop in the new one and it was that easy. I was amazed at how soon the part was delivered and happy to have a working burner again.
Was this helpful?
Thank you for voting!
burner element was not working right
0 of 1 people
found this instruction helpful.
-
Janet from Uniontown, PA
- Really Easy
- Less than 15 mins
Since it was a plug-in burner, only needed to pull it out and put the other one in.
Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.
Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.
Was this helpful?
Thank you for voting!
Would no longer heat up
0 of 1 people
found this instruction helpful.
-
Scott from Lakewood, OH
- Really Easy
- Less than 15 mins
Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!
Was this helpful?
Thank you for voting!