RY80940B Ryobi Pressure Washer - Parts

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit wil...Read morel be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is b...Read moreroken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

This is a genuine item that is made for use with Ryobi pressure washers. It is supplied directly from the original equipment manufacturer. The pump is a key component of your pressure washer as it is what will produce a high-pressure water flow. If your pump is damaged or not performing as it should, this will provide an identical replace...Read morement for the one that was installed on a new unit. One durable metal body pump is included. To ensure the correct installation, please refer to the appropriate diagrams of your model. Note, the pump is secured with three bolts which are sold separately. You will need pliers, a screwdriver and a wrench set to remove the housing and perform this repair. It is recommended to keep notes or take photos as you disassemble to make the reassembly easy.

This is an original part from Homelite. The push nut cap (1/2") is made for use with many pressure washers. The metal cap secures the wheel to the main frame assembly. This component is sold individually. A screwdriver and a pair of pliers may be needed for the installation.

This is an authentic OEM sourced replacement bolt which is specially designed for use with pressure washers. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for the correct location and use of this item. This bolt is made of high-quality metal and it is sold individually.

This detergent tank is an authentic OEM replacement part. It is used in various models of Homelite and Ryobi pressure washers. This part stores the cleaning agent inside of the pressure washer that assists in breaking down grease and grime. The outer coverings must be removed to access the plastic tank. Please note this part does not include the soap tank cap (part 310650002).

This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through the unit. Over time it may wear out and get clogged eventually requiring a replacement. Note, this durable filter screen is sold individually. Refer to the owner's manual for the correct application.

This trigger handle is a genuine OEM replacement part specifically made to fit pressure washers. This main control handle/trigger is attached to the hose on one end and the spray wand on the other. It does not require any special tools to install, simply twist into place. Sold individually. WARNING: Never change nozzles without first engaging the lock-out on the trigger handle.