RY80940A Ryobi Pressure Washer - Parts

This is an original part from Homelite. The lock nut (m8 x 1-1/4 mm) is compatible with many pressure washers, and is sold individually. The metal lock nut helps to secure various components of the pressure washer. A wrench, hex key and screwdriver are often needed for the installation.

This seal is designed for pressure washers made by Ridgid, Homelite and Ryobi. It is made of metal and fits onto the idle down assembly. A wrench may be required while replacing this part. Please keep in mind that two seals may be required during installation, but this part is sold as a single item. This is an authentic OEM part.

This is an authentic OEM replacement part used in Ryobi and Homelite pressure washers. This is a spray wand holder, which allows the spray wand to be clipped into place in the frame for convenient access. Note that screw/nut are sold separately. One holder is included. Often purchased with: • Screw (1/4-20 x 45 mm, Truss Hd), part # 660...Read more760002 • Lock Nut (1/4 In), part # 678016006 • Main Frame Assembly (left), part # 310703005

This is an OEM part sourced from the original manufacturer for use with pressure washers. This stainless steel spray wand screws into the trigger handle assembly, giving a 21" reach. One spray wand is included.

This is a genuine OEM sourced replacement part designed for use with Pressure Washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 3100 PSI. Easily connects to the washers with M22 connection. (25 Feet)

This trigger handle holder is an OEM part direct from Homelite. This item is composed of durable plastic, and is fastened onto the handle assembly and hose storage. The trigger handle holder is sold individually. A screwdriver and a wrench are needed for the removal and replacement.

This is an authentic OEM nozzle designed to fit the Homelite and Ryobi pressure washers listed below. It is a twist-adjustable nozzle featuring five (5) separate nozzle degree widths. One (1) nozzle is included. The nozzles are listed below in order from gentlest to most forceful: • Soap Fan - a gentle nozzle used to apply soap to a clo...Read morese and/or very delicate area • Soap Jet - a slightly less gentle nozzle made to apply soap to a farther/smaller area • Forty (40) Degree - a gentler nozzle best used for light duty washing on surfaces prone to breakage, scratching, and/or paint loss • Twenty-five (25) Degree - suited for standard pressure washing duties on more sturdy/solid surfaces • Zero (0) Degree - the most powerful possible nozzle degree width designed for heavy duty grime and stains from harder surfaces

This is an authentic manufacturer-sourced replacement part which is specially made for use with Ridgid, Homelite and Ryobi pressure washers. Please make sure to refer to the appropriate diagrams for your model for the correct location and application of this idle down bolt. Keep in mind this high-quality part is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.

It is an identical replacement for a missing or a damaged hose storage that was installed on a new equipment. Refer to the owner's manual for your specific model to ensure the exact location and the correct application of this part. Keep in mind this high-quality hose storage is made of durable materials and is sold as an individual item....Read more Note, the hardware to secure it is sold separately. This genuine OEM hose storage is designed for Homelite and Ryobi pressure washers.

This is an authentic manufacturer-sourced replacement washer which is specially designed for use with pressure washers. The purpose of this part is to provide a tight seal between connected components, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of ...Read moreyour model for the correct location and application of this hardware. Keep in mind this high-quality washer is made of durable metal and is sold individually.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with circular saws. The two wire cord is encased in a durable casing and is used to relay electricity from the outlet to the switch assembly. This cord is available as an individual replacement part.