Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise and wobbles during spin cycle.
3 of 13 peoplefound this instruction helpful.
William from SPANISH FORT, AL
Difficult
More than 2 hours
Pliers, Screw drivers, Socket set
Ordered the hub repair kit. I had much difficulty removing the agitator. It was stuck. Running the strap under it and tapping on the agitator assembly should've caused it to pop up but didn't. I had to ultimately strike it hard with a metal hammer. That released it but caused a hole in the agitator. The center metal gear on the agitator w
... Read moreas very worn and rusty. I decided to also replace the agitator. I saved about $300 on the repair.