My Orders
- Home
- RUD1000HB1
- Instructions
RUD1000HB1 Roper Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
4 broken wheel assemblies on upper rack
1 of 3 people
found this instruction helpful.
-
Jeffrey from Little Egg Harbor, NJ
- Really Easy
- Less than 15 mins
Snapped them in place....2 minutes....ordered the parts 2PM on a friday and they arrived 11AM Saturday...couldn't believe it! Thanks!
Was this helpful?
Thank you for voting!
door seal leaked steam
1 of 3 people
found this instruction helpful.
-
BRIAN from GOWANDA, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
It was a very simple repair. I removed the old door seal out of the track and installed the new seal.
Was this helpful?
Thank you for voting!
Water leaking from front door of dishwasher
1 of 3 people
found this instruction helpful.
-
Gregory from North Port, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Took less than 5 minutes. Pried edge of old door seal out with a flathead screwdriver, then slowly pulled out old seal. Thoroughly cleaned area for new seal with rubbing alcohol, inserted new seal and trimmed the end to fit just right. Presto, no leaks whatsoever!
Was this helpful?
Thank you for voting!
slow leak at motor/pump interface
1 of 3 people
found this instruction helpful.
-
Donald from Webster Groves, MO
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
Got parts breakdown online, took pump assy apart, ordered new parts, replaced bad parts, put pump assy and dishwasher back together, piece of cake, no problems.
Other Parts Used:
Was this helpful?
Thank you for voting!
seals were leaking,dry rotted from setting five years without using.
2 of 7 people
found this instruction helpful.
-
mike from seymour, IN
- Easy
- 1- 2 hours
-
Pliers, Screw drivers, Socket set
I Disconected The 3' hose Behind Impellor.Unscrew Cap Holding Impellor In. Pull It Out, Replce With New One.Put It Back Together In Reverse
Was this helpful?
Thank you for voting!
water was leaking ou the door
1 of 4 people
found this instruction helpful.
-
ROSE from ELVERSON, PA
- Really Easy
- Less than 15 mins
pulled the old door seal off and pushed the new seal into place and it works great!
THANK YOU!
THANK YOU!
Was this helpful?
Thank you for voting!
front leak
0 of 1 people
found this instruction helpful.
-
Rod from Dripping Springs, TX
- Really Easy
- 15 - 30 mins
pulled out the old gasket, aligned and pressed in the new gasket
Was this helpful?
Thank you for voting!
I broke one part trying to install
0 of 1 people
found this instruction helpful.
-
dwight from onaka, SD
- A Bit Difficult
- 15 - 30 mins
-
Pliers
no tools necessary buy instructions would have brrn helpful
Was this helpful?
Thank you for voting!
Upper dishrack broke
1 of 4 people
found this instruction helpful.
-
Veronica from Miami, FL
- Really Easy
- Less than 15 mins
Order was very easy, received on time. Repari was sucessful.Thank you!
Was this helpful?
Thank you for voting!
Water Seeping From Under/Around The Door
0 of 1 people
found this instruction helpful.
-
Nate from Fort Worth, TX
- Really Easy
- Less than 15 mins
I opened the door and pulled the gasket from around the dishwasher. The gasket does not have any adhesive around it, so it pulled free almost immediately. The new gasket was pressed into place around the door and I was done. It couldn't have been any easier. I suspected it was the gasket when I saw pinched portions that did not return
... Read more
to the original shape and there were no visible cracks in the machine.
Read less
Was this helpful?
Thank you for voting!
leaking around door
1 of 4 people
found this instruction helpful.
-
john a from west seneca, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
1-2-3 EASIEST JOB I EVER HAD to DO AND THE WIFE IS PROUD OF ME FINALLY.
THANKS , , ,Bat from WEST SENECA (Buffalo, NY)
THANKS , , ,Bat from WEST SENECA (Buffalo, NY)
Was this helpful?
Thank you for voting!
water leaked through door gasket.
0 of 1 people
found this instruction helpful.
-
Charles F. from Burnet, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Lowered door and put a weight on it to keep it open. with screwdriver pried out the old gasket. It was simple. looked at the end of the replacement gasket and inserted it into the track with the small hole down. Job Complete. about three minutes total time.
Was this helpful?
Thank you for voting!
Front door panel was missing
0 of 1 people
found this instruction helpful.
-
Crystal from Bowman, GA
- Really Easy
- Less than 15 mins
I removed the cardboard insert, put the new front panel on and replaced the tabs. That was it!
Was this helpful?
Thank you for voting!
broke water inllet valve
3 of 10 people
found this instruction helpful.
-
ANTHONY from MANITOWOC, WI
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench set
disconnected the water, removed the old valve put in new valve and waah laah it worked .
Was this helpful?
Thank you for voting!
The detergent door won't open fully
1 of 4 people
found this instruction helpful.
-
Bob from Carlsbad, CA
- A Bit Difficult
- Less than 15 mins
Sorry, probably need a spring as the door is fine. While reading other stories about how hard the spring was to get right, I assumed the spring was part of the door assembly.
I'll be calling and returnint the part.
i ... Read more '
I'll be calling and returnint the part.
i ... Read more '
Read less
Was this helpful?
Thank you for voting!