RTW4640YQ1 Roper Washer Parts & Repair Help | PartSelect
Models > RTW4640YQ1

Manuals & Care Guides for RTW4640YQ1

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
PartSelect #:PS3497627
Manufacturer #:W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the wa...
In Stock
PartSelect #:PS11747978
Manufacturer #:WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
In Stock
PartSelect #:PS10057144
Manufacturer #:W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch...
In Stock
PartSelect #:PS11742027
Manufacturer #:WP3949550
This part goes on the agitator retaining bolt.
In Stock
PartSelect #:PS11703290
Manufacturer #:W10780048
Washing machine tub suspension rod kit. Set of 4 rods, 4 suspension balls, and 4 bushings. The suspension rods help to dampen the movement of the washer tub.
On Order
PartSelect #:PS3502189
Manufacturer #:W10440729
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-pie...
In Stock
PartSelect #:PS385132
Manufacturer #:72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...
On Order
PartSelect #:PS11740613
Manufacturer #:WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washe...
In Stock
PartSelect #:PS11748588
Manufacturer #:WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
In Stock
PartSelect #:PS11741199
Manufacturer #:WP3355758
This is the cap for your agitator.
In Stock
Questions and Answers for RTW4640YQ1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lid Lock light blinking, machine will not start

  • Customer: David from Los Alamos, NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 288 of 358 people found this instruction helpful
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not le... read more

Violent shacking in spin mode.

  • Customer: Terry from Homosassa, FL
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 152 of 187 people found this instruction helpful
Watched a video on the internet. read more

Defective lid latch - Cabrio Washer

Lid Latch Assembly – Part Number: W10404050
  • Customer: William from Wakefield, RI
  • Difficulty: Very Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 69 of 83 people found this instruction helpful
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installati... read more