RTW4340SQ0 Roper Washer Parts & Repair Help | PartSelect
Models > RTW4340SQ0

RTW4340SQ0 Roper Washer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(268)
PartSelect #:PS388034
Manufacturer #:80040
This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusti...
$4.32
In Stock
(139)
PartSelect #:PS1485646
Manufacturer #:285753A
This direct drive motor coupling (Direct Drive Washer Motor Coupling, Motor Coupling, Washer Motor Coupling, Coupling Kit) provides a cushioned connection between the transmission ...
$23.15
In Stock
(160)
PartSelect #:PS334650
Manufacturer #:285811
This kit (Medium Cam Agitator Repair Kit, Washer Agitator Cam Repair Kit, Cam Agitator) is used to repair the agitator. These parts are located inside the agitator auger near the ...
$27.44
In Stock
(81)
PartSelect #:PS11741239
Manufacturer #:WP3363394
The direct drive drain pump (Whirlpool Direct Drive Washer Pump, Drain Pump, Washer Drain Pump, Water Pump) removes water from the washer during the drain cycle without the use of ...
$41.31
In Stock
(25)
PartSelect #:PS11743345
Manufacturer #:WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost it...
$4.80
In Stock
(59)
PartSelect #:PS334641
Manufacturer #:285785
A clutch assembly (Clutch, Washer Clutch) is found in your washing machine and is responsible for spinning the basket during the spin cycle. The clutch lining can wear over time. I...
$49.12
In Stock
(5)
PartSelect #:PS334562
Manufacturer #:285587
This is a genuine OEM thrust spacer for your washer, and is also commonly known as a retainer ring. The spacer is about 2.5 inches in diameter, is made of plastic, and is white in ...
$5.20
In Stock
(9)
PartSelect #:PS11741866
Manufacturer #:WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
$7.48
In Stock
(59)
PartSelect #:PS11745957
Manufacturer #:WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire....
$39.01
In Stock
(2)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$7.76
In Stock
Questions and Answers for RTW4340SQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No movement from Basket & agitator

  • Customer: Jeff from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 1014 of 1075 people found this instruction helpful
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor co... read more

washer wouldn't agitate

  • Customer: mike from Kent, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 825 of 873 people found this instruction helpful
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing usin... read more

Upper portion of agitator, no longer pushing clothing down.

Agitator Repair Kit – Part Number: 285811
  • Customer: Matt from Pawtucket, RI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 770 of 796 people found this instruction helpful
The instructions came with the repair kit, it was fairly simple and straight foward.

One bolt held the entire agitator unit in the washer, as well as held the upper and lower halves together. Once that nut was removed the two halves seperated and the plastic clutch pieces could easily be replaced wtih the new onces in the repair kit.

Ve... read more